
84
RQT9249
Changing the unit’s settings
(All factory default settings are indicated with underlined text.)
(All factory default settings are indicated with underlined text.)
§
1
The default setting is “PCM“
.
§
2
The default setting is “Bitstream“.
Picture
Still Mode
Select the type of picture shown when you pause play (
>
111,
Frames and fields).
[Automatic]
[Field]
Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
[Frame]
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected. (The
picture is clearer and finer.)
Seamless Play
Select the play mode between playlist chapter segments and
partially deleted titles.
≥
It is not valid for titles in DR mode or AVCHD videos.
[On]
The chapters in playlists are played seamlessly. This does
not work when there are several audio types included on
the playlist and when using Quick View (PLAY
a
1.3).
Additionally, the positioning of chapter segments may
change slightly.
[Off]
The points where chapters in playlists change are played
accurately, but the picture may freeze for a moment.
NTSC Video Output
Select how the NTSC image is output.
[NTSC]
Output as NTSC.
[PAL60] Convert and output as PAL60.
Select this when connected to the PAL format TV.
Sound
Dynamic Range Compression
[DVD-V]
Change the dynamic range for late night viewing.
[On]
[Off]
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥
When “Dolby Digital/Dolby Digital Plus” or “DTS”, “MPEG” or
“HE-AAC” is set to “Bitstream” or ”Bitstream (DTS)” , there are
no downmix effects for the outputted audio.
≥
The audio will be outputted in “Stereo” in the following cases.
– AVCHD playback
[Stereo]
When connected to equipment that does not
support the virtual surround function.
[Surround
encoded]
When connected to equipment that supports the
virtual surround function (Dolby Pro Logic, DTS
Neo: 6, etc.)
Bilingual Audio Selection
(Only when recording from DV input)
Select whether to record the main or secondary audio type when:
≥
Copying to a DVD-R, DVD-RW (DVD-Video format), +R and
+RW.
≥
“Rec for High Speed Copy” is enabled. (
>
83)
≥
Recording sound in LPCM (
>
85, “Audio Mode for XP
Recording”).
[M 1]
[M 2]
≥
You cannot select the audio on this unit when recording from an
external source, such as when copying from a video cassette
recorder (except from DV equipment connected to this unit’s DV
input terminal). Select the audio on the other equipment.
≥
When recording from the unit’s DV terminal, select the type of
audio recording from “Audio Mode for DV Input” (
>
85).
Digital Audio Output
≥
Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
It will be converted to 48 kHz regardless of the setting in
following cases.
≥
The signals have a sampling frequency of over 96 kHz.
≥
The disc has copy protection.
[On]
Signals are converted to 48 kHz. (Choose when the
connected equipment cannot process signals with a
sampling frequency of 96 kHz.)
[Off]
Signals are output as 96 kHz. (Choose when the
connected equipment can process signals with a
sampling frequency of 96 kHz.)
Dolby Digital/Dolby Digital Plus
§
1
DTS
§
2
MPEG
§
1
Select to output Dolby Digital, Dolby Digital Plus, DTS Digital
Surround, or MPEG as bitstream or PCM.
[Note]
≥
Not making the proper settings may result in noise.
≥
If the unit is connected with the HDMI AV OUT terminal, the
specifications of the connected equipment take preference
over this unit and audio selected in these items may not be
output (e.g., when a television is connected, the HDMI audio
output of this unit is limited to down-mixed 2ch.)
[Bitstream]
Select “Bitstream” when the connected
equipment can decode the respective audio
format.
[PCM]
Select “PCM” when the connected equipment
cannot decode the respective audio format.
Refer to the operating instructions for connected
devices to verify whether or not they can decode
each of the audio formats.
Set the speaker output on the amplifier when
output with PCM.
HE-AAC
Select to output HE-AAC as bitstream or PCM.
[Bitstream (DTS)]
Select “Bitstream (DTS)” when the
connected equipment can decode HE-AAC
format.
[PCM]
Select “PCM” when the connected
equipment cannot decode HE-AAC format.
Set the speaker output on the amplifier
when output with PCM.
DMRXW400EF-RQT9249-L_eng.book 84 ページ 2008年9月19日 金曜日 午後6時14分