Recording
TQBS0146
30
1
Press [PROG/CHECK].
2
Select the programme, then perform the
operations.
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”. (
>
29)
3 Press [OK].
To exit the timer recording list
Press [EXIT
].
• Programmes to be recorded with Keyword recording (
>
31)
are not displayed.
To confirm and edit a timer
programme
• Red: To delete a timer programme
• Green:
To resolve an overlap timer programme
- The overlapped timer recording list will
appear. (
>
27)
• Yellow:
To deactivate a timer programme
- The timer icon “
F
” will change from red to
grey.
- Press the yellow button again to activate
timer recording standby. (The timer icon
“
F
” will change to red.)
• [STATUS
]: Show programme information
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Delete
Total 3/32
Timer Recording
154:04 DR
Time Remaining
TUE 03.01.2017 XXXXX
Info
Keyword List
Resolve overlap
New Timer Programme
MON 13.01
MON 13.01
XXXX - XXXX
XXXX - XXXX
XXXX - XXXX
XXXX - XXXX
MON 13.01
TUE 07.01
DR
HG
DR
DR
OK
OK
Guide
Guide
e.g.,
Screen icons
Red: Timer recording standby is
activated.
Grey: Timer recording standby is
deactivated.
[
(Red)
Currently recording programme
A part or all of the programme will not
be recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was
not completed because of some
reason.
Auto Renewal Recording is set.
(
>
29)
Guide Link (
>
29)
Series Timer Recording (
>
28)
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
• The timer remains active until the
date indicated below
.
It may not be possible to record
because:
- there is not enough space left.
- the number of possible programmes
has reached its maximum. (
>
18)
- programmes are deactivated, etc.
DMR-UBT1GL_eng.book 30 ページ ２０１７年７月２５日 火曜日 午後１時４５分
