Reference
TQBS0149
96
Cannot edit.
• You may not be able to edit on the HDD if there
is no available space. Delete any unwanted
programmes to create empty space. (
>
52)
Photos do not play back normally.
• The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
(
>
20)
This unit does not recognise the USB device
correctly.
• If inserted during playback the USB device may
not be recognised by this unit.
Disconnect and reconnect the USB device. If it
still does not recognise the connection, switch
the unit to standby mode and turn it on again.
• USB devices connected using a USB extension
cable other than a dedicated one or a USB hub
may not be recognised by this unit.
• Two USB devices cannot be used
simultaneously. If you insert a USB device while
watching TV, the USB device detection screen
is displayed. Use this screen to select the
device you want to use.
The TV Guide information is not displayed
properly.
• Set the clock correctly. (
>
90, Clock)
• There was a programme change, or TV Guide
information from a broadcast station was
possibly not correctly transmitted.
• If signal quality is bad, the TV Guide system
may not be able to receive any data.
• It may take time until the TV Guide screen is
displayed correctly. Wait for about a day.
Picture regularly breaks up on some channels.
• Adjust the reception with “Manual Tuning”. (
>
80)
The channel which was once selectable
cannot be selected.
• Reveal the channel on the channel list.
(
>
80)
Digital broadcasts cannot be received.
• To receive an encrypted broadcast, a CI module
valid for the broadcast is required.
Major channels and favourite channels are not
displayed on the top part of the channel list.
•
[DVB-C]
To change channel allocation, restart
Auto Setup in Basic Settings menu and change
channel number allocation selection. (
>
80)
• You can change channel number assignment.
(
>
80)
[DVB-T]
[DVB-T2]
Picture very infrequently breaks up on some
or all channels.
• Electrical atmospheric interference caused by
bad weather may cause pictures to break up
and audio to mute or distort momentarily.
You cannot access this unit from DLNA
compatible equipment on the network.
• Check the network connection and the network
settings. (
>
14, 16)
• It may not be possible to connect depending on
the types of the equipment or the status of the
equipment.
When using this unit as a server, video frames
are dropped.
• Change the following settings:
- Conversion Setting for DLNA (
>
88)
- Resolution Setting for DLNA (
>
88)
• The unit cannot be used as a server while you
are watching or playing back a 4K programme,
for example.
Edit
Photo
USB
TV Guide
Broadcast
Network
DMR-UBC86EN_eng.book 96 ページ ２０１７年８月８日 火曜日 午前１１時１２分
