Gettin
g started
TQBS0149
15
10
Set the connection setting for the 4K TV.
When connected to a 4K (50p or 60p)-
compatible TV, connection setting to 4K TV
below is displayed.
The screen above does not appear for a
non-4K compatible TV. Proceed to Step 11.
1 Press [OK] to start the setting.
A black screen appears for a few seconds
and then a message appears.
2 Select “Yes” and press [OK].
Connection to 4K TV is successful.
(Go to Step 11)
When the following screen appears:
“Yes”: Next setting is displayed.
“No”: Connection setting to 4K TV start again.
(Retry the setup process from Step 10.)
11
Set “Quick Start” to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
To stop partway
Press [RETURN
].
To restart setup (
>
80, Auto Setup)
To confirm that channels have been tuned
correctly (
>
27, Using Channel List)
To set “Preferred Language” after completing
“Easy Setting” or “Easy Network Setting” (
>
81)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
• Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
• Frequency and Network ID settings may be
necessary depending on the cable provider. For
details, consult the cable provider.
8
Auto Setup will start automatically.
(This operation may take some time.)
[DVB-C]
When tuning is completed, press [OK].
[DVB-T]
[DVB-T2]
If more than one broadcast area is found, the
channel list will be rearranged so that the
channels for the selected region will be given
priority.
(Norway only)
9
Clock will be set automatically.
If the clock setting screen appears, set the
time manually (
>
90, Clock).
4K(50p/60p) Output
Start connection check with your 4K TV.
Once connection check is started and if the video is not displayed
correctly, please wait for the next display. The connection check
could take up to 30 seconds to display the new message screen.
Press OK.
OK
RETURN
• To reconnect this unit to a 4K (50p or 60p)-compatible TV
after connecting this unit to a non-4K compatible TV and
completing “Easy Setting”, set “4K(50p/60p) Output” to
“4K(50p/60p) 4:4:4” or “4K(50p/60p) 4:2:0”. (
>
86)
4K(50p/60p) Output
Is this message displayed correctly ?
OK
RETURN
Yes
No
4K(50p/60p) Output
Connection check is finished.
Cannot connect with 4K.
Please check if the HDMI connected
device and cable are compatible with 4K.
Move on to the next setting ?
Select “Yes” for the next setting.
Select “No” to set again.
OK
RETURN
Yes
No
DMR-UBC86EN_eng.book 15 ページ ２０１７年８月８日 火曜日 午前１１時１２分
