Gettin
g started
SQT1332
10
• When using a TV or an amplifier/receiver that does not
display “ARC” on the HDMI terminal, it is necessary to
connect the TV and the amplifier/receiver with a digital
audio cable to enjoy the TV audio on the amplifier/receiver.
• When you do not want the audio to be output from the TV,
set “HDMI Audio Output” to “Off” (
>
61).
When this unit is connected to the network, you
can enjoy network functions (DLNA function,
Network Service, TV Anytime, etc.).
For details about connection method, refer to the
instructions supplied with the connected
equipment.
• Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
About wireless LAN connection (
>
12, Easy
Network Setting)
• For up-to-date compatibility information on your Wireless
router, refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
• The unit is not compatible with public wireless LAN
services.
Amplifier/receiver connections
HDMI terminal
• You will not be able to view 3D programmes or
4K images with this connection if your
amplifier/receiver is not 3D or 4K compatible.
DIGITAL AUDIO OUT terminal
HDMI cable
Amplifier/
receiver
HDMI cable
(supplied)
COAXIAL IN
Amplifier/receiver
Coaxial cable
Network connection
After you make the LAN cable/Wireless LAN
connection, the network setting is needed.
(
>
12, Easy Network Setting)
LAN cable connection
Wireless LAN connection
Broadband
router, etc.
Internet
LAN (ethernet)
cable
DMRHWT260GN_eng.book 10 ページ 2016年4月14日 木曜日 午後1時16分