Recording
SQT0816
25
Recording TV programmes
Recording
To set the recording time
1 Select “Recording Time” or “Continuous
recording” in step 4 (
>
left).
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with
[
2
,
1
].
Continuous recording:
The recording is continued until you press
[STOP
∫
].
2 Press [OK].
To convert the recording mode after recording
in DR mode
Refer to “File Conversion”. (
>
42)
To confirm whether the conversion is
completed
Refer to “To confirm whether the conversion is
completed”. (
>
42)
To cancel a conversion
Refer to “To cancel a “During standby”
conversion”. (
>
42)
The titles can only be recorded to built-in
HDD and cannot be copied from built-in HDD
to the media other than USB HDD.
• This operation only records to built-in HDD.
• This unit can record two programmes being
broadcasted at the same time.
1
Select the channel to record.
2
Press [REC MODE] and select the
conversion mode, then press [OK].
• This unit will record the programmes in DR
mode once, and then automatically convert
to the selected recording mode while this
unit is in standby.
• Recording mode (
>
8)
• The conversion mode set here is used as
an initial value for the next recording.
3
Press [REC
¥
].
Recording will start.
4
Select “Automatic Stop”, then press [OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
• You can also select “Recording Time” or
“Continuous recording”. (
>
right)
HG
HX
HE
HL
HM
XP
SP
LP
EP
Off (DR)
Conversion Mode Setting
OK
RETURN
HDD Remain:
(DR)
m
h
High
Definition
Data Size
Large
Small
Large
Small
Standard
Definition
Automatic Stop at 8:45 AM
REC1/OTR
Recording Time
Continuous recording
30 min
8:00 AM - 8:45 AM
DMRHWT250GL_eng.book 25 ページ 2015年2月4日 水曜日 午後4時34分