T
rouble
s
ho
oting
VQT3F57
92
Troubleshooting guide
VIERA Link does not work.
¾
Some functions may not work depending on the
version of “HDAVI Control” of the connected
equipment. This unit supports “HDAVI Control 5”
functions.
¾
If the connection for the equipment connected with
HDMI was changed, or if there was a power failure
or the plug was removed from the household
mains socket, “HDAVI Control” may not work.
In this case, change TV (VIERA) setting for
“HDAVI Control” again.
You cannot access this unit from DLNA
compatible equipment on the network.
¾
Check the network connection and the network
settings. (
>
12, 15, 64, 77)
¾
It may not be possible to connect depending on the
types of the equipment or the status of the
equipment.
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾
Use 802.11n (2.4 GHz or 5 GHz) Wireless router.
Set the encryption mode on the Wireless router.
≥
To check the encryption type of your wireless
connection (
>
76, Wireless Settings)
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in connection
interruptions or other problems.
¾
On the “Wireless Settings” screen (
>
76), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection. If 3
or fewer indicators are lit or the connection is being
interrupted, change the position or angle of your
Wireless router and see if the connection state
improves. If there is no improvement, connect to a
wired network and perform the “Network Easy
Setting” (
>
15) again.
To return all the settings to the factory preset
¾
Perform “Shipping Condition” or “Default Settings”.
(
>
80)
To reset the PIN number for parental control
¾
The PIN number for parental control returns to the
factory preset (“0000”).
1
While the unit is on, press and hold [OK], the
“Yellow” button and the “Blue” button on the
remote control at the same time for more than
5 seconds.
–“00 RET” is displayed on the unit’s display.
2
Repeatedly press [
1
] (right) on the remote
control until “03 VL” is displayed on the unit’s
display.
3
Press [OK] on the remote control.
–“INIT” is displayed on the unit’s display.
VIERA Link
Network
To reset this unit
DMR-HW100EB-VQT3F57_eng.book 92 ページ ２０１１年８月５日 金曜日 午後２時４分
