Panasonic DMR-EZ485VK, Руководство по эксплуатации

Страница: 81 / 100

81
RQT9056
Troubleshooting Guide
Use the following connection to suit the antenna lead to
the unit’s RF IN terminal, and the 75

coaxial cable to the
antenna terminals on your TV or other e q uipment. Refer to the
other e q uipment’s operating instructions for more information.
If you connected this unit and a TV without an audio/ v ideo
cable, interference (lines or patterning) or a v ery poor picture
may appear on the TV. If this happens, follow the steps below
to change the
v ideo playback channel (RF output channel) to
remo v e the interference.
This unit
from the antenna
(Flat) Twin lead
300

cable
300−75

transformer
To this unit’s RF
IN terminal
Other equipment (television etc.)
75−300

transformer
75

coaxial
cable
VHF or UHF
Tele v ision
If the Antenna Connector doesn’t Match
Changing RF Output Channel
TRACKING/V-LOCK
CH
to select “CH 3” or “CH 4”.
The unit’s display
Each time you press the button:
CH 3 (Default setting)

CH 4

OFF

For connections with the audio/ v ideo cable, set the RF
output channel to “OFF”.
RF Output Channel
Press the channel up/down buttons
to select a RF Output Channel.
Ch. 3
OK
Press and hold
for more than
5 seconds.
– The RF output
channel number
displays on the
unit’s display.
OK
to fi nish.
Notes
When you set the RF output channel to “CH 3” or “CH 4”
Video from this unit can be v iewed on channels 3 and 4 on
the TV. Press [VCR/TV] to switch to VCR mode and output
v ideo from this unit ( 16).
To Reset This Unit
To reset the channel information and the
clock settings
On the main unit
CH CH
Press and hold both buttons
for about 5 seconds.
To reset the ratings le v el settings
W ith the unit stopped
OPEN/CLOSE
to open the disc tray.
On the main unit
REC CH CH
SD CARD
Press and hold both buttons for
about 5 seconds.
To restore the unit if it freezes
On the main unit
PO W ER
Press and hold for more than
10 seconds.
–The unit is off.
or
On the main unit
RESET
Press and hold for
more than 1 second
with a pointed object.
You can reset both parental rating ( 56) and
DVD-Video rating ( 59).
Ref
erence
DMR-EZ48VP.indb 81 DMR-EZ48VP.indb 81 2007/12/13 20:44:27 2007/12/13 20:44:27