17
RQT9046
Basic OperationsBasic Operations
Recording Television Programs
Refer to “Important Notes for Recording” (
➔
20) and “Advanced Recording” (
➔
21 to 23) for detailed information on
recording.
RAM
-R
-R DL
-RW(V)
+R
+R DL
+RW
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
RAM
If the disc is protected, release protection (
➔
44).
•
•
to turn the unit on.
“HELLO” appears on the unit’s display.
–
;
OPEN/CLOSE
to open the tray
(Button located on the upper front of the unit)
.
Insert a disc with enough remaining blank space and press
[
;
OPEN/CLOSE] again to close the tray.
–
to select desired channel.
Antenna Mode:
e.g. channel 4-2
Cable TV Mode:
e.g. channel 102-45
To select with the numbered buttons (
➔
15).
When no channel setting is performed on the unit and broadcast is
recorded directly from the cable box or satellite receiver, select a
channel on the connected equipment and press [INPUT SELECT]
to select “IN1” or “IN2”.
–
–
to select the recording mode.
Recording mode should be determined by program length and
available time on the disc (
➔
21).
Recording mode
Remaining time
–
to start recording.
REC
Pausing Recording
Press [
h
PAUSE].
Press again to restart recording.
–
Stopping Recording
Press [
g
STOP].
Tips
Icons such as “
RAM
” indicate usable
discs. Refer to pages 62 and 63.
Notes
-R
-R DL
-RW(V)
+R
+R DL
+RW
It takes about 30 seconds for the unit
to complete recording management
information after recording finishes.
You cannot change the channel or
recording mode during recording.
•
•
DMR-EZ28-P̲PC (RQT9046-P).indb 17
DMR-EZ28-P̲PC (RQT9046-P).indb 17
2007/12/07 15:25:38
2007/12/07 15:25:38