Transferring (Dubbing)
62
VQT0N92
You can transfer (dub) titles recorded on a disc onto a tape by
specifying the recording parts while watching them.
Preparation
≥
Select the unit viewing channel (e.g. AV input) on the TV.
DVD
≥
Insert the disc containing the title to be copied (
l
8).
≥
Check the channel. If “TP” channel is selected, transfer (dubbing)
does not work properly.
- When the “TP” channel is selected on DVD, you cannot select the
“DC” channel on VHS.
VHS
≥
Insert a video cassette with an accidental erasure prevention tab.
(
l
48)
≥
Confirm that the remaining tape time is sufficient for recording.
(
l
55)
[1]
Press [DVD] and press [
1
, PLAY].
≥
Start playing the disc and find the start point of the recording.
≥
Select the audio to be played (the audio to be recorded)
beforehand.
[RAM]
≥
The audio from the TV is recorded. To record your favorite
audio, select the audio by pressing [AUDIO]. (
l
23)
[RAM]
≥
When a DVD-R, a DVD-RW (DVD-Video format) or a +R is
inserted, you cannot select the audio.
[2]
Press [
;
, PAUSE] at the start point of the
recording.
[3]
Press [VHS].
[4]
Select “DC” channel with [INPUT SELECT] or
[CH,
W
,
X
].
≥
The DVD picture is displayed on the TV.
[5]
Press [
1
, PLAY].
≥
Start playing the video cassette and find the start point of the
recording.
[6]
Press [
;
, PAUSE] at the start point of the
recording, then press [
¥
, REC].
≥
Put the unit in the recording standby mode.
[7]
Press
[REC MODE] to select the recording
mode.
(
l
51)
[8]
Press [
;
, PAUSE].
≥
VHS recording and disc play start at the same time.
Note
≥
When the transfer (dubbing) is already started, you can switch the
DVD/VHS output manually.
∫
Manual Transfer (Dubbing)
To pause or stop Manual Transfer (Dubbing)
You cannot stop or pause DVD and VHS at the same time.
∫
To pause or stop recording
Press [VHS] and press [
;
, PAUSE] or [
∫
, STOP].
∫
To pause or stop play
Press [DVD] and press [
;
, PAUSE] or [
∫
, STOP].
SCHEDULE
DVD ERASE
REC
REC MODE
ADD/DLT
TIME SLIP
STATUS
DISPLAY
COPYING
VHS
DVD
CREATE
CHAPTER VCR/TV
JET REW
REC
REC MODE
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
FUNCTIONS
DIRECT NAVIGATOR
TOP MENU
VHS MENU
PLAY
OPERATION
SELECT
POWER
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+
INPUT SELECT
VHS
DVD
VHS
DVD
REC MODE
INPUT SELECT
1
;
∫
CH,
W
,
X
µ
∫
About DC channel
(DC: Dubbing input channel)
When the DC channel is selected, it becomes possible for VHS to
receive audio and video signals from DVD. This enables dubbing
from DVD to VHS.
≥
The DC channel can be selected by pressing [VHS] and
pressing [INPUT SELECT] or [CH,
W
,
X
] several times.
≥
When you play back a disc after turning the channel to “DC”, the
picture on DVD is displayed on the TV screen.
≥
Contrary to the DC channel, the TP channel enables DVD to
receive audio and video signals from VHS.
≥
When the TP channel is selected on DVD, you cannot select the
DC channel on VHS.
VHS
DVD
ES30VP&PC.book 62 ページ ２００５年２月２１日 月曜日 午後２時３２分
