12
RQT7540
Ge
tti
ng s
ta
rte
d
Refer to the control reference on page 11.
STEP
2
TV Tuning
≥
When connecting to a television with the VIDEO OUT,
S-VIDEO OUT or COMPONENT VIDEO OUT terminal
(
≥
When connecting to a television that does not have
the Q Link function (
This unit’s Auto-Setup function automatically tunes all available TV
stations and synchronizes the time when the TV channel that is
broadcasting time and date information is tuned.
[For]the[United]Kingdom]only[
≥
When connecting to a television with RF socket only
(
1
Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2
Press [
Í
DVD] to turn the unit on.
Auto-Setup starts. This takes about 5 minutes.
[For]the[United]Kingdom]only[
(When connecting to a television with RF socket only)
Set the new RF output channel to TV (refer to the
instructions for your TV).
Select an unused channel pre-set on your TV and tune it to
the RF output channel number shown on the unit’s display.
(When the Auto-Setup screen does not appear clearly even
after performing the above operations, re-tune the channel
until the Auto-Setup screen becomes clear.)
3
When Auto-Setup has completed, the Owner ID settings
screen appears.
Press [
1
] and press the numbered
buttons to enter a 4-digit PIN number.
≥
Make a note of the PIN number (don’t forget), as it is not
possible to return to the factory preset.
4
Press [ENTER] twice to store the PIN
number.
The cursor moves to “Name”.
5
Press [
1
].
6
Press [
3
,
4
] to select a letter and
then press [
1
].
Repeat this to enter the name.
7
Press [ENTER] to store the name.
8
Press [
4
] and [
1
], “House No.” and
“Postcode” in the same way.
9
Press [RETURN].
The Owner ID settings screen disappears.
To stop partway
Press [RETURN].
∫
If the clock setting menu appears
Set the clock manually (
➡
page 44).
∫
To confirm that stations have been tuned
correctly (
∫
To restart Auto-Setup (
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
Press and hold [
X
CH] and [CH
W
] on the main unit for about 5
seconds.
≥
All the settings except for the ratings level, ratings password,
Owner ID and time settings return to the factory preset. The timer
recording programmes are also cancelled.
[For]the[United]Kingdom]only[
[When connecting to a television with RF socket only (
∫
To enter the satellite station’s name (
The name of the satellite station is not set automatically. (“-- ---” will
appear under “Name” in the program list). After Auto-Setup is
completed, enter the name manually.
∫
If you connect other equipment to AV2 terminal
of this unit
Change the “AV2 Input” and “AV2 Connection” in the SETUP menu
to match the connected equipment (
Auto-Setup
(Setup without Q Link functions)
Auto-Setup
Ch
1
Auto-Setup in progress, please wait.
RETURN: to abort
RETURN
RETURN
Owner ID
RETURN : leave
PIN number
¢¢¢¢
Name
House No.
Postcode
7540en.book 12 ページ ２００４年２月１０日 火曜日 午後１２時５８分
