Getting started
VQT4W69
24
Settings
When you experience problems
Refer to “When you experience problems with
Easy Network Setting”. (
>
115)
To restart Easy Network Setting
1 Press [FUNCTION MENU]. (
>
21)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Easy Network Setting” in “Network”,
then press [OK].
To redo settings individually
If “Easy Network Setting” did not work properly or
when you change the settings individually,
perform the following steps:
1 Press [FUNCTION MENU]. (
>
21)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Network Settings” in “Network”, then
press [OK].
4 Refer to “Network Settings”. (
>
96)
Check security before using Home Network
function
If you set “Home Network function” to “On”, all
connected devices on the same network can
access this unit. Ensure that the router for your
home network has adequate security system to
prevent unauthorized access.
• Refer to the operating instructions of the hub or router.
• If you set “Home Network function” or “Remote Recording
function” to “On”, the setting for “Quick Start” is fixed to
“On”.
• Do not use this unit to connect to any wireless network for
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
• After performing network settings on this unit, the settings
(encryption level, etc.) of the Wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of Wireless router.
• Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
When a single cable router is used, it is
necessary to change the settings of this unit and
then run Auto Setup.
1
Press [FUNCTION MENU].
2
Select “Basic Settings” in “Setup”, then press
[OK].
3
Select “Antenna System” in “DVB Tuning”.
5
Press [
3
,
4
] to select “Auto Setup”, then
press [OK].
1 Select “Yes”, then press [OK].
2 Select the country, then press [OK].
Auto Setup method when using a
single cable router
4
Press [
2
,
1
] to select “Single Cable”.
Basic Settings
OK
RETURN
DVB Tuning
HDD / Disc / USB HDD
Picture
Sound
Display
Connection
Network
Others
RETURN
DVB Tuning
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
Preferred Language
Exchange Channel List
Antenna System
Single Cable
LNB Configuration
Signal Condition
DMR-BST835_735_730EG_eng.book 24 ページ ２０１３年７月１日 月曜日 午後４時５１分
