Panasonic DMR-BS750EG, Руководство по обслуживанию

Страница: 22 / 133

22
U73 HDMI connection error
(authentication error) When authentication error occurs while the
equipments (TV, amplifier etc.) are con-
nected by HDMI. (or when there is a prob-
lem with the HDMI cable) No display
U73 display disappears when error
has been solved by Power OFF/ON
of connecting equipment or by
inserting/removing of HDMI cable.
U76 HDMI connection error HDMI cannot be output because you are
connected to a model that does not support
copyright protection. No display
U77 Illegal disc error Due to the current disc not having autho-
rized copyright information, video output is
not performed. No display
U88 The unit is carrying out its
recovery process. No display
U99 Hang-up Displayed when communication error has
occurred between Main microprocessor
and Timer microprocessor. No display
Displayed is left until the [POWER]
key is pressed.
H19 02 Inoperative fan motor When inoperative fan motor is detected
after powered on, the power is turned off
automatically.
The event is saved in memory. No display No display
F00 No error information Initial setting for error code in memory
(Error code Initialization is possible with
error code initialization and main unit initial-
ization.) No display No display
F58 Drive hardware error When drive unit error is detected, the event
is saved in memory. No display No display
F34 Initialization error when main
microprocessor is started up
for program recording When initialization error is detected after
starting up main microprocessor for pro-
gram recording, the power is turned off
automatically.
The event is saved in memory. No display No display
F74 HDMI Device Key Communi-
cation error. HDMI connection could not be authenti-
cated due to a transfer malfunction.
Factor of HDMI Device key-road failure
• When HDMI LSI is damaged.
• When the bus line of I2C doesn't oper-
ate normally.
• When device key information recorded
is damaged.
No display
F75 HDMI Device Key Information
error HDMI connection could not be authenti-
cated due to an internal data malfunction.
Factor of HDMI Device key-road failure
• When HDMI LSI is damaged.
• When the bus line of I2C doesn't oper-
ate normally.
• When device key information recorded
is damaged.
No display
UNSUP-
PORT Unsupported disc error *An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty. “This disc is
incompatible.” Display for 5 seconds.
The character indication flows side-
ways.
Error Code Diagnosis contents Description Monitor Display Automatic LCD display