Convenient functions
SQT0292
99
7.1ch Audio Reformatting
[BD-V]
Surround sound with 6.1 ch or less is
automatically expanded and played back at
7.1 ch.
• If “Off” is selected, sound is played over the
original number of channels. (Note that in
the case of 6.1 ch audio, playback will be at
5.1 ch)
Audio reformatting is enabled in the following
cases:
- When you have selected “PCM” in “Digital
Audio Output”. (
>
96)
- When the audio is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD or LPCM.
Contents Type Flag
If “Automatic” is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select “Off” when you do not want to use
“HDAVI Control”.
Common Interface
Access to software contained on CI module.
(
>
14)
• Select “Slot 1:” or “Slot 2:” and press [OK].
Follow the on-screen instructions.
• This setting cannot be made when “TV
System” is set to “NTSC” (
>
98).
• On-screen instructions may not correspond to the remote
control buttons.
• For more information about TV service, please contact
your service provider.
• Depending on the card, in some cases its use together
with this unit may be limited or not possible.
Network
Easy Network Setting
Press [OK] to start Easy Network Setting. (
>
26)
Network Settings
LAN Connection Mode
Select the LAN connection method.
• When not using wireless LAN (when turning
it off), select “Wired”.
Wireless Settings
This allows to set and check the connection
settings of the Wireless router.
e.g.,
1
Encryption type
2
Reception
3
Type of wireless router
Connection Setting
The Wireless router connection wizard will
be displayed.
Double Speed Mode Setting ( 2.4GHz )
When a 2.4 GHz wireless format is used,
this setting sets the connection speed.
• If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the
same frequency band, and there is
consequently a greater risk of reception
interference. This can cause the
connection speed to drop or the
connection to become unstable.
Wireless Settings
Double Speed Mode Setting ( 2.4GHz )
Connection Setting
Current connection settings
The current connection settings and status are
displayed.
Connection status
Current status
Network name
( SSID )
Wireless type
802.11n (5GHz/40MHz)
Authentication type
Encryption type
AES
Connected
Reception
DMR-BST_BCT940EG_eng.book 99 ページ ２０１４年７月２日 水曜日 午後５時４０分
