Troubleshooting
SQT0292
112
Troubleshooting guide
Image for the Quick View is not smooth.
• Image may not be played back smoothly in case
of high definition titles.
Cannot play the disc on other players.
• Refer to “Play on other players”. (
>
9)
The available recording time does not
increase even after deleting titles on the disc.
•
[BD-R]
[DVD-R]
[+R]
Available space on the disc
does not increase even after deleting titles.
•
[DVD-RW]
[+RW]
Available space on the disc
increases when you delete the last title.
Cannot edit.
• You may not be able to edit on the HDD if there
is no available space. Delete any unwanted
titles to create empty space. (
>
54)
Cannot create a video playlist.
• Creation or editing of playlists cannot be done
on this unit.
The contents of the SD card cannot be read.
• Remove the card from the slot and then insert
again. If this does not solve the problem, switch
the unit to standby mode and turn it on again.
Copying, deleting and setting protection takes
a long time.
• When there are a lot of folders and files, it may
sometimes take a long time.
Photos do not play back normally.
• The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
(
>
120)
This unit does not recognize the USB device
correctly.
• If inserted during playback the USB device may
not be recognized by this unit.
Disconnect and reconnect the USB device. If it
still does not recognize the connection, switch
the unit to standby mode and turn it on again.
• USB devices connected using a USB extension
cable other than a dedicated one or a USB hub
may not be recognized by this unit.
• This unit does not recognize USB HDDs other
than those in which the size of one sector is
512-bytes or 4096-bytes. (For details, consult
the dealer of your USB HDD.)
You have forgotten your rating PIN.
• The rating level returns to the factory preset.
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• “00 RET” is displayed on the front panel
display.
2 Repeatedly press [
1
] (right) until “03 VL” is
displayed on the front panel display.
3 Press [OK].
• “INIT” is displayed on the front panel
display.
Edit
Photo
USB
DMR-BST_BCT940EG_eng.book 112 ページ 2014年7月2日 水曜日 午後5時40分