Panasonic DMP-UB704, Руководство по эксплуатации

Страница: 37 / 44

- 37 -
Reference
Video is not output.
¾
Video is not output when the “High Clarity
Sound” is set to “On (Video Off)”. (
> 28)
¾ Video from the HDMI AUDIO OUT terminal is
not output when the “HDMI(AUDIO) Output
Mode” is set to “Audio Only”. (
> 29)
Video is not output in 4K or high-definition.
¾ Confirm that “Video Format” in the Setup
menu is set properly. (
> 29)
¾ Confirm the HDMI cable, related connections
and the compatibility of TV video input.
To output images in 4K, connect the HDMI
cable to a 4K compatible terminal of the
connected device. (
> 10)
¾ Set “HDMI(AUDIO) Output Mode” to “Audio
Only”. (
> 29)
¾ To enjoy image in 4K (50p/60p), set “4K(50p/
60p) Output” to “4K(50p/60p) 4:4:4” or
“4K(50p/60p) 4:2:0”. (
> 29)
¾ If “4K(50p/60p) Output” is set to “4K(50p/60p)
4:4:4”, check to see if the connected HDMI
cable supports 18 Gbps. (
> 10, 29)
¾ If 4K images are not output from the
connected 4K-compatible TV, set “4K(50p/
60p) Output” to “4K(50p/60p) 4:4:4” or
“4K(50p/60p) 4:2:0”. (
> 29)
3D video is not output.
¾ Connect to a 3D compatible device (e.g., TV
and amplifier/receiver).
¾ When a non-3D compatible amplifier/receiver
is connected between this unit and a TV, 3D
video is not output. (
> 12)
¾ If there is a non-3D compatible amplifier/
receiver connected to the HDMI AUDIO OUT
terminal, set the “HDMI(AUDIO) Output
Mode” to “Audio Only”. (
> 29)
¾ Confirm the settings on this unit and the TV
for 3D. (
> 21)
3D video is not output correctly as 2D.
¾
Select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (
>
31, “3D
BD-Video Playback”)
¾
Discs that have recorded titles with Side by
side (2 screen structure) and that can be
enjoyed in 3D are played back in accordance
with the settings of the TV.
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾ Adjust the aspect setting on the TV.
There is a lot of image lag when playing video.
¾ Set “0” all items in the “Noise Reduction”.
(
> 27)
¾ Set “Audio Delay”. ( > 31)
Cannot hear the desired audio.
¾ Check the connections and the “Digital Audio
Output” settings. (
> 11, 30)
¾ To output audio from a device connected with
an HDMI cable, set “Audio Output” to “On” in
the Setup menu. (
> 30)
¾ When connecting this unit to a TV via an
HDMI VIDEO OUT and to an amplifier/
receiver via an HDMI AUDIO OUT, set
“HDMI(VIDEO) Output Mode” to “Automatic
( Video Only / Video+Audio )”. (
> 11, 29)
Audio
DMP-UB704_EG-TQBS0021_eng.book 37 ページ ２０１６年８月３０日 火曜日 午前１１時８分