Panasonic DMP-BDT700, Руководство по эксплуатации

Страница: 38 / 44

38
SQT0280
F99
¾ The unit fails to operate properly. Touch [ Í /I]
on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
NET
¾
While connecting to a network.
NoPLAY
¾
There is a viewing restriction on a BD-Video
or DVD-Video. (
> 32)
NoREAD
¾ The media is dirty or badly scratched. The
unit cannot play.
Remove
¾ The USB device is drawing too much power.
Remove the USB device.
Setcode 
(“

” stands for a number.)
¾ The remote control and this unit are using
different codes. Change the code on the
remote control.
Press and hold
[OK] and the
indicated number
button at the same time for more than 5
seconds.
U59
¾ Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
H  or F 
(“

” stands for a number.)
¾ There is something unusual.
¾ Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
Start
¾
A firmware update will start. Please do not
turn off the unit.
UPDATE

/5
(“

” stands for a number.)
¾ A firmware update is in progress.
Please do not turn off the unit.
Finish
¾ The firmware update is complete.
Messages on the unit’s
display
1
Disconnect the plug from the household
mains socket, wait a few seconds, then
reconnect it.
2
Touch [
Í
/I] to turn the unit on.
DMP-BDT700EB-SQT0280.book 38 ページ ２０１４年５月１３日 火曜日 午後１時３分