Panasonic DMP-BDT300GA, Руководство по обслуживанию

Страница: 15 / 93

15
5.1.2. Special Modes Setting
Item FL display Key operation
Mode name Description Front Key
Rating password The audiovisual level setting password is
initialized to Level 8.
While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
Repeatedly press
[ ]
on the
remote control or [POWER] on the
unit until "03 VL" is displayed on the
unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Service Mode Setting every kind of modes for servicing.
*Details are described in
7.1.3. (BD) Service
Mode at a glance .
Turn the power off.
Press the [5] [9] and [R] button
simultaneously for five seconds,
then [70 RET] is displayed on FL.
Press the [ ] or
[ ]
button to
select until [80 SRV] is displayed on
FL.
Press the [OK] button .
*The command is transmitted by
attached remote control.
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
Screen display: [The history has been
cleared] is displayed for five seconds.
Same display as before execution.
When the power is on, disc is not in
tray, press [STOP] and [POWER]
(Remote Controller) keys simulta-
neously for 5 seconds.
Forced disc eject Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
While the unit is off, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
Repeatedly press
[ ]
on the
remote control or [POWER] on the
unit until "06 FTO" is displayed on
the unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Forced power-off When the power button is not effective while
power is ON, turn off the power forcibly. Display in P-off mode. Press [POWER] key over than 10
seconds.
Aging Perform sequence of modes as * Aging
Description shown below continually. Display following the then mode.
Turn the power on.
Press the [5] [9] and [R] button
simultaneously for five seconds,
then [70 RET] is displayed on FL.
Press the [ ] or
[ ]
button to
select until [81 AIG] is displayed on
FL.
Press the [OK] button .
*The command is transmitted by
attached remote control.
NOTE1:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 4 seconds.