E
ng
lis
h
VQT3V27
3
Getting started
Accessories
Check the supplied accessories before using this
unit.
∫
Using the remote control
Insert so the poles (
i
and
j
) match those in the
remote control.
Safety precautions
WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
≥
Do not expose this unit to rain, moisture, dripping or
splashing.
≥
Do not place objects filled with liquids, such as vases, on
this unit.
≥
Use only the recommended accessories.
≥
Do not remove covers.
≥
Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
≥
Do not let metal objects fall inside this unit.
≥
Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage,
≥
Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
≥
Insert the mains plug fully into the socket outlet.
≥
Do not pull, bend, or place heavy items on the lead.
≥
Do not handle the plug with wet hands.
≥
Hold onto the mains plug body when disconnecting the plug.
≥
Do not use a damaged mains plug or socket outlet.
Install this unit so that the AC mains lead can be unplugged
from the socket outlet immediately if any problem occurs.
CAUTION
Unit
≥
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
≥
Do not place sources of naked flames, such as lighted
candles, on this unit.
≥
This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.
≥
This unit is intended for use in moderate climates.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage,
≥
Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit is
well ventilated.
≥
Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
≥
Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥
Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive vibration.
Batteries
Mishandling of batteries can cause electrolyte leakage and
may cause a fire.
≥
Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
≥
When disposing the batteries, please contact your local
authorities or dealer and ask for the correct method of
disposal.
≥
Do not mix old and new batteries or different types at the
same time.
≥
Do not heat or expose to flame.
≥
Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and windows
closed.
≥
Do not take apart or short circuit.
≥
Do not recharge alkaline or manganese batteries.
≥
Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote
control for a long period of time. Store in a cool, dark place.
1
Remote control
(N2QAYB000738)
2
Batteries for remote control
1
CD-ROM
≥
Product numbers provided in these operating instructions
correct as of January 2012. These may be subject to
change.
Point it at the remote control signal sensor on this
unit.
R6/LR6, AA
(Alkaline or manganese batteries)
(3)
DMP-BD77EG-VQT3V27.book 3 ページ 2012年1月18日 水曜日 午後7時10分