18
7.1.2.
Special Modes Setting
Item
FL display
Key operation
Mode name
Description
Front Key
Rating password
The audiovisual level setting password is
initialized to Level 8.
While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
Repeatedly press
[
]
on the
remote control or [POWER] on the
unit until "03 VL" is displayed on the
unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Service Mode
Setting every kind of modes for servicing.
*Details are described in
7.1.3. (BD) Service
Mode at a glance
.
Turn the power on.
Press the [5] [9] and [R] button
simultaneously for five seconds,
then [70 RET] is displayed on FL.
Press the
[
]
button to select
until [80 SRV] is displayed on FL.
Press the [OK] button .
*The command is transmitted by
attached remote control.
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
When the power is on, disc is not
in tray, press and hold [6], [7] and
[Y] on the remote control at the
same time for more than 5 seconds.
- "50 RET" is displayed on the unit's
disply.
Repeatedly press
[
]
on the
remote control or [POWER] on the
unit until "51 NOP" is displayed on
the unit's display.
Press and hold [STOP] on the
remote control until "52 BRE" is
displayed on the unit's display.
Press [OK] on the remote con-
trol or [OPEN/CLOSE] on the unit.
Forced disc eject
Removing a disc that cannot be ejected.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
Repeatedly press
[
]
on the
remote control or [POWER] on the
unit until "06 FTO" is displayed on
the unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Forced power-off
When the power button is not effective while
power is ON, turn off the power forcibly.
Display in P-off mode.
Press [POWER] key over than 4
seconds.
Содержание DMP-BD75GA
