Panasonic DMP-BD50EG, Руководство по обслуживанию

Страница: 12 / 91

12
7.1.2. Special Modes Setting
UNSUP-
PORT Unsupported disc error *An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty. This disc is
incompatible.
Display for 5 seconds.
NO READ Disc read error *A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read. Cannot read.
Please check the
disc.
HARD
ERR Drive error The drive detected a hard error. BD drive error. Display for 5 seconds.
IR ERR IR communication error [IR ERR] is displayed when communication
between Timer microprocessor and IR micro-
processor fails. No display
SELF
CHECK Restoration operation Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
BD drive. No display
PLEASE
WAIT Unit is in termination process Unit is in termination process now.
BYE is displayed and power will be turned off.
No display
UNFOR-
MAT Unformatted disc error You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment. The disc is not
formatted properly.
No PLAY When there is a viewing restric-
tion on a BD-Video or DVD-
Video. Rating password is set. No display
Item FL display Key operation
Mode name Description Front Key
TEST Mode *All the main unit's parameters are initialized. Press [STOP], [SKIP FWD] and
[OPEN/CLOSE] keys simulta-
neously for five seconds when
power is off.
Rating password The audiovisual level setting password is ini-
tialized to
Level 8 .
Open the tray, and press [SKIP
REV] and [PLAY] simultaneously for
5 seconds.
Service Mode Setting every kind of modes for servicing.
*Details are described in
7.1.3. Service Mode
at a glance .
When the power is off, press [SKIP
FWD], [OPEN/CLOSE] and
[PAUSE] keys simultaneously for 5
seconds.
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
Screen display: [The player's history data has
been cleared] is displayed for five seconds.
Same display as before execution.
When disc is not in tray. press
[STOP] and [POWER] keys simulta-
neously for 5 seconds.
Forced disc eject Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted. The display before execution
leaves. When the power is off, press [SKIP
FWD] and [PAUSE] keys simulta-
neously for 5 seconds.
Error Code Diagnosis contents Description Monitor Display Automatic FL display