Panasonic DMP-BD45EE, Руководство по обслуживанию

Страница: 14 / 75

6 Operating Instructions
6.1. Taking out the Disc from BD Drive Unit when the Disc cannot be ejected
by OPEN/CLOSE button
6.1.1. When the power can be turned off.
6.1.1.1. When the power can be turned off.
1. Turn the unit off, then press and hold [OK], [Yellow] and [Blue] buttons on the remote control simultaneously for 5 seconds.
- “00 RET” is displayed on the unit's FL display.
2. Repeatedly press the right cursor button on the remote Control or Power button on the unit until “06 FTO” is displayed on the
unit's FL display.
3. Press [OK] button on the remote control or [OPEN/CLOSE] button on the unit.
6.1.1.2. When the power can not be turned off.
Press [POWER] button on the unit for over 4 seconds to turn off the power forcibly, and step 1 to 3 above.
6.1.2. When the Forcible Disc Eject can not be done.
1. Turn off the power and pull out AC cord.
2. Remove the Top Case.
3. Put the unit so that bottom can be seen.
4. Insert paper clips, etc. into the hole on the bottom of BD Drive and slide the paper clips, etc. in the direction of the arrow to
eject tray slightly.
Paper clips, etc
5. Pull the unit upward, and push out Tray by paperclips, etc. or minus screw driver (small).
Tray Front Panel
14