![background image](http://html1.mh-extra.com/html/panasonic/dmp-bbt01/dmp-bbt01_operating-instructions-manual_3487660038.webp)
38
VQT3W24
Reference
Indicator illumination
Confirm the following items in correspondence to the status of the LED of the unit.
An error condition exists when the Status LED is red. Open the panel at the side of the main unit and
check the status of the indicator LEDs. If the red LED does not turn off even when following operation is
performed, contact your dealer.
Indicator LEDs
Description
Red flashes for 6 times
The remote control and main unit are using
different codes. Remote control code may be
changed when the battery is changed. Reset the
settings of the main unit and the remote control to
the states at the time of purchase with following
operation.
1
Turn the unit off once, and then turn it on
again.
2
Touch and hold [
<
] on the main unit for more
than 4 seconds while the HOME menu is
displayed.
3
Press and hold [OPTION] and the green
button at the same time for more than
5 seconds.
Remote control code for the main unit and the
remote control will be set to “1”. Change the
settings as necessary. (
>
37, “Remote Control”)
The unit is carrying out an internal process. This is
not a malfunction. You cannot operate the unit
while the light is flashing. Wait for a while.
The unit fails to operate properly. Touch and hold
[
Í
/I] on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
The USB device is drawing too much power.
Please disconnect or remove the USB device from
the unit.
The USB device may be incompatible.
The red or green light flashes slowly.
Lights up
Flashes
Red lights up
Flashes
Lights up
Red lights up
DMP-BBT01EB-VQT3W24_mst.book 38 ページ 2012年4月9日 月曜日 午前10時20分