18
VQT3W24
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
To update the firmware
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
≥
If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
>
37,
“Firmware Version Information”)
≥
Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥
If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (
>
37)
If you have more than one Panasonic player/
recorder and the remote control operates both
products at once, you will need to change the
remote control code to prevent this occurrence.
(
>
37, “Remote Control”)
Firmware updates
Press [HOME]
>
select “Setup”
>
select
“Player Settings”
>
select “System”
>
select
“Firmware Update”
>
select “Update Now”
ACCESS LED will light up while downloading the
firmware. The unit cannot be operated until the
ACCESS LED is turned off.
After the firmware is installed, the unit will restart
and the following screen will be displayed.
New firmware is available.
Please update firmware in Setup.
The firmware has been updated.
Current Version: x.xx
STEP 7 :
Reprogramming the
remote control
DMP-BBT01EB-VQT3W24_mst.book 18 ページ 2012年4月9日 月曜日 午前10時20分