12
VQT3C18
Preparing the Power Supply
The unit is in the standby condition (the [
Í
] indicator lights)
when the AC mains lead is connected. The primary circuit is
always “live” as long as the AC adaptor is connected to an
electrical outlet.
To conserve power
This unit consumes 0.4 W (Approximately 4.5 W when Quick
Start is set to “On”) of power even when turned off. When the
unit is not going to be used for a long time, disconnect the AC
mains lead from the household mains socket.
This unit can be used in places without a mains socket, such as
outdoors, by attaching the supplied battery pack.
≥
The battery is not charged at the time of purchase. Charge
before initial use.
≥
The battery is designed only for use with this unit. It cannot
be used with other equipment.
∫
Attaching the battery pack
Turn the unit off before attaching or detaching the battery pack.
1
Bring in from the left, aligning the grooves.
2
Slide all the way to the right until you hear a “click”.
Check to make sure it is securely fastened.
∫
Detaching the battery pack
When not using for long periods of time
≥
Detach the battery pack (
>
above).
(Even when the unit is turned off, there is a small amount of
voltage running through the unit, and this may result in a
malfunction.)
≥
Recharge the battery for re-use.
∫
Recharging the battery pack
Attach the battery pack and connect the AC adaptor (
>
left).
The [CHARGE] indicator (
>
8) lights while charging the battery, and
the [CHARGE] indicator turns off when battery charging is finished.
≥
“ECO-charge” (
>
33) function can be used with this unit.
Charging mark is displayed for a few seconds on the lower
right of the screen while this unit is “Off”.
∫
Approximate recharging and play times
(Hours)
≥
Play time indicated above may differ depending on the use.
∫
Checking the remaining battery charge
Not displayed when the AC adaptor is in use.
Press [OPTION] while this unit is “On”
Remaining charge is displayed for a few seconds at the bottom
right of the screen.
Charge the battery pack when the display starts to flash.
≥
Appears automatically when there is only a few minutes of
charge remaining.
≥
This unit may turn off without the display flashing when the
media is played back with the battery low on charge.
Using the unit connected to the
AC adaptor
[For[the[United[Kingdom[and[Ireland[only]
BE SURE TO READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 2 BEFORE CONNECTION.
Using the battery pack
AC adaptor
(supplied)
To a household
mains socket
AC mains lead
(supplied)
1
2
3
RELEASE
DETACH
ATTACH
RELEASE
DETACH
ATTACH
Bottom side of this unit
Battery pack
(supplied)
“ECO-charge”
is set to “On”
“ECO-charge”
is set to “Off”
Battery
pack
Recharging
*1
*1
at 20
o
C
Play
*2,*3
*2
at 20
o
C / using headphones / LCD brightness level is “
s
5”
(
>
15, “Adjusting the pictures on the LCD screen”)
.
*3
When the battery pack is recharged setting “ECO-charge” to “Off”.
(When the battery pack is recharged setting “ECO-charge” to “On”,
the battery duration is about 80 %.)
“ECO-charge”
“Off”
“On”
DY-DB20
(supplied)
4
3.25
4
DY-DB30
(optional)
5
4
5
DY-DB300
(optional)
7
5.5
8
RELEASE
DETACH
ATTACH
Bottom side of this unit
2
Slide.
1
Press and hold.
ᵣ ᵡ ᵭ
Recharge
(flashing)
Fully charged
VQT3C18~Body1_mst.fm 12 ページ ２０１１年１月２６日 水曜日 午後７時４８分
