- 41 -
Preparation
•
Use a battery with sufficient battery power or the AC adaptor (optional) and multi conversion
adaptor (optional) when formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If you cannot format, contact the dealer or your nearest Service Center.
•
If you set a different language by mistake, select [
~
] from the menu icons to set the desired
language.
•
The Stabilizer function is switched between [ON] and [OFF] every time [MENU/SET] is pressed
during the [STABILIZER DEMO.].
•
In Playback Mode, [STABILIZER DEMO.] cannot be displayed.
•
[STABILIZER DEMO.] is an approximation.
•
Press [DISPLAY] to close [STABILIZER DEMO.].
•
[AUTO DEMO] has no TV output capability even when it is in Playback Mode.
•
Press [MENU/SET] to close [AUTO DEMO].
}
[SCENE MENU]
Set the screen that is displayed when the mode dial is set to
.
[OFF]:
The recording screen in the currently selected Scene
Mode appears.
[AUTO]:
The [SCENE MODE] menu screen appears.
[VERSION DISP.]
It is possible to check which version of firmware is on the camera.
[FORMAT]
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
~
[LANGUAGE]
Set the language displayed on the screen.
[DEMO MODE]
Displays the amount of jitter the camera has detected.
([STABILIZER DEMO.])
The camera’s features are displayed as Slide Shows. ([AUTO
DEMO])
[STABILIZER DEMO.]
A
Amount of jitter
B
Amount of jitter after correction
[AUTO DEMO]:
[OFF]
[ON]
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: [email protected]
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
DEMO
A
B
