10
VQT2L60 (ENG)
(ENG) VQT2L60
11
Charging battery
■
About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCG10PP.
It has been found that counterfeit battery packs which look very
similar to the genuine products are made available to purchase
in some markets. Some of these battery packs are not adequately
protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised
that we are not liable for any accident or failure occurring as a
result of use of a counterfeit battery pack. To ensure that safe
products are used we recommend that a genuine Panasonic
battery pack is used.
•
Use the dedicated charger and battery.
•
The camera has a function for distinguishing batteries which can
be used safely. The dedicated battery (DMW-BCG10PP) supports
this function. The only batteries suitable for use with this unit
are genuine Panasonic products and batteries manufactured by
other companies and certified by Panasonic. (Batteries which do
not support this function cannot be used). Panasonic cannot in
any way guarantee the quality, performance or safety of batteries
which have been manufactured by other companies and are not
genuine Panasonic products.
•
The battery is not charged when the camera is shipped. Charge
the battery and set the Clock before use.
•
Charge the battery with the charger indoors (10 °C - 35 °C (50 °F -
95 °F)).
■
Guidelines for number of recordable pictures and
recording time
Number of recordable
pictures
Approx. 300 pictures
Recording time
Approx. 150 min
Playback time
Approx. 300 min
Recording conditions by CIPA standard
•CIPA is an abbreviation of [Camera & Imaging Products Association].
•[PROGRAM AE] Mode.
•[GPS SETTING] is set to [OFF].
•Temperature: 23 °C (73.4 °F)/Humidity: 50% when LCD monitor is on.
∗
•Using a Panasonic SD Memory Card (32 MB).
•Using the supplied battery.
•Starting recording 30 seconds after the camera is turned on. (When the
Optical Image Stabilizer function is set to [AUTO].)
•Recording once every 30 seconds with full flash every second
recording.
•Rotating the zoom lever from Tele to Wide or vice versa in every
recording.
•Turning the camera off every 10 recordings and leaving it until the
temperature of the battery decreases.
∗
The number of recordable pictures decreases when [LCD MODE] is used.
Insert the battery terminals and attach
the battery to the charger
Ensure [LUMIX] faces outwards.
1
2
Connect the charger to the electrical outlet
Charging light ([CHARGE])
On:
Charging in progress (approx. 130
min. if fully depleted)
Off:
Charging complete
Detach the battery after charging is completed
