7
3 Service Navigation
3.1.
Introduction
This service manual contains technical information, which allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
3.2.
Important Notice
3.2.1.
About Lens Block
• The image sensor (MOS FPC) unit which are connected to the lens unit with 3 screws.
These screws are locked with the screw locking glue, after performing the Optical tilt adjustment.
During servicing, if one of MOS FPC fixing screws are loosened, the Optical tilt adjustment must be performed.
(About the Optical tilt adjustment, refer to the “10.3.2. Adjustment Specifications” for details.)
3.2.2.
About Flexible Cable and Connector
Do not touch carelessly so that the foreign body should not adhere to the terminal part of flexible cable and connector.
Wipe off with a clean cloth and the cotton bud, etc. when the terminal part is dirty.
3.3.
Service Notes
3.3.1.
About Wi-Fi Function
Содержание DMC-SZ9EA
