Panasonic DMC-FT2EB, Руководство по обслуживанию

Страница: 53 / 66

S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Flash P.C.B. .......................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Schematic Diagram ..................................................... S-5
S4.3. Rear Operation Schematic Diagram ..................................... S-6
S5. Print Circuit Board .................................................................... S-7
S5.1. Flash P.C.B. .......................................................................... S-7
S5.2. Rear Operation P.C.B. ........................................................... S-8
S6. Replacement Parts List ............................................................ S-9
S7. Exploded View ....................................................................... S-13
S7.1. Frame and Casing Section.................................................. S-13
S7.2. Packing Parts and Accessories Section .............................. S-14
Table of contents
Service Manual
DSC1002022CE
Diagrams and Replacement
Parts List
Vol. 1
(A)...........Blue Type (except DMC-FT2EE/EF, TS2GT/GD)
(D)...........Orange Type (except DMC-TS2GT)
Colour
(S)...........Silver Type (except DMC-FT2EF, TS2GT)
(Y)...........Yellow Type (except DMC-FT2EE/GC/SG, TS2GH/GD)
Model No.
Digital Camera
DMC-FT2EB
DMC-FT2EE
DMC-FT2EF
DMC-FT2EG
DMC-FT2EP
DMC-FT2GC
DMC-FT2GN
DMC-FT2SG
DMC-TS2P
DMC-TS2PC
DMC-TS2PU
DMC-TS2GH
DMC-TS2GD
DMC-TS2GT
Name of Signal
OFTR
FEP
This signal is connected
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice