Panasonic DLP PT-FRZ50, Руководство по эксплуатации

Страница: 128 / 186

Chapter 4 Settings — [NETWORK] menu
128 - ENGLISH
Note
f
If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically.
f
The network setting is common for the <LAN> terminal and the <DIGITAL LINK/LAN> terminal.
[Art-Net CHANNEL SETTING]
Set the assignment of the channel.
For the channel definitions used for controlling the projector with the Art-Net function, refer to “Using Art-Net
function” (
x
page 167).
1) Press
as
to select [Art-Net].
2) Press the <ENTER> button.
f
The [Art-Net] screen is displayed.
3) Press
as
to select [Art-Net CHANNEL SETTING].
4) Press
qw
to switch the item.
[2]
Uses the channel assignment in standard setting.
[USER] Changes the channel assignment.
[1]
Uses the channel assignment with DZ21K series compatible.
DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series
f
When [2] or [1] is selected, the function assigned to the channel is displayed by pressing the <ENTER>
button.
f
When [USER] is selected, proceed to Step 5) .
5) Press the <ENTER> button.
f
The [CHANNEL SETUP] screen is displayed.
6) Press
as
to select the channel to set, and press
qw
to switch the item.
[LIGHT OUTPUT] Adjusts the amount of light.
[INPUT SELECT] Switches the input.
[POWER] Controls the power status.
[SHUTTER] Controls the shutter function.
[FADE-IN] Sets the fade-in time.
[FADE-OUT] Sets the fade-out time.
[SCREEN ADJUSTMENT] Performs screen correction.
[FREEZE] Freezes the projected image, and turns off the audio.
[COLOR] Adjusts the color saturation.
[TINT] Adjusts the tint.
[RASTER PATTERN] Displays the raster pattern.
[AUDIO VOLUME] Adjusts the volume.
[ENABLE / DISABLE] Enables/disables the control of the projector with the Art-Net function.
[NONE] No definition
f
The setting can be also made by pressing
as
to select the channel, pressing the <ENTER> button to
display the item list, pressing
asqw
to select the item, and pressing the <ENTER> button.
f
Same item cannot be set for multiple channels, except for [NONE].
[Art-Net STATUS]
Display the content of control assigned to each channel and the received data of that channel.
1) Press
as
to select [Art-Net].
2) Press the <ENTER> button.
f
The [Art-Net] screen is displayed.
3) Press
as
to select [Art-Net STATUS].
4) Press the <ENTER> button.
f
The [Art-Net STATUS] screen is displayed