Adapts to a Variety of Environments
Universal Design
• Edge blending
The edges of adjacent screens can be blended and their luminance controlled. For example, the
adjoining edges in a 2-screen system can be blended to create a smooth, seamless image.
• Colour matching
When several units are used together, this function corrects for slight variations in the colour
reproduction range of individual projectors. The PC software assures easy, accurate control.
Independent, 7-axis adjustment (red, green, blue, yellow, magenta, cyan, white) ensures high
precision colours and minimizes colour variations.
• Multi-screen processor
The PT-D12000E can project large, multi-screen images without any additional equipment.
Up to 100 units (10 x 10) can be edge-blended at a time.
* Image uniformity over the entire screen may be adversely affected by the type of screen used or the
lamp mode selected. Also, due to differences in the manner in which the lamp brightness decreases
with time, some fluctuation may appear in overall screen brightness. When this occurs, the unit must
be readjusted, which is a service that is offered for a fee.
For details, please contact the store where you purchased the product, or a sales representative.
Excellent System Functions
Lens Shift
The optical axis can be adjusted both vertically and horizontally by a
remote control, giving you greater setup ease and flexibility.
A Wide Selection of Lenses
Choose from a wide lineup of lenses for your system,
including short-throw, long-throw zoom and
fixed-throw lenses for rear projection use. The
additional lenses make it easy to adapt your
projector to the installation site. The lens cover opens
completely for easier mounting.
Built-in Multi-screen Support System
Multiple Terminal Including DVI-D and LAN Slot
The PT-D12000E comes equipped with DVI-D and LAN (PJ-Link™)
slots. It also features an array of terminals, including two RGB inputs
and D-sub HD 15-pin, a 5-BNC connector, serial in/out, S-video input,
two remote inputs, and one remote out. In addition to offering DVI-D
control, the PT-D12000E is
HDCP*-compliant and thus
meets a broad range of
projection needs.
* High-Bandwidth Digital Content Protection
Other Features
•Mechanical lens shutter
•Picture in picture (The picture in picture function cannot be used with
some input signals and selected inputs.)
•Anti-theft features with chain opening
•ID assignment for up to 64 units
•Built-in test pattern
•Selectable 9-language on-screen menu (English, German, French,
Spanish, Italian, Russian, Japanese, Chinese, Korean)
�
Easy Lamp Replacement
Removing a single screw is all it takes to
open the rear cover. This makes it easy to
replace a lamp while the projector is still
in the mounting bracket – a big advantage
in tight ceiling-mounted installations.
�
Remote Control with Blind Touch Operation
Contoured surfaces let you operate the control keys by touch.
Connection terminals and controls are illuminated by LEDs, and
the remote control is fully backlit for sure, easy operation in the
dark. The wireless remote control has a range of 30 m (98.4 feets),
so you can control the projector from a good distance.
�
4 Direction Grip
Grooves on all four sides of the projector’s bottom let you get a firm,
comfortable grip on the unit so that it can be moved safely.
Colour matching
Edge blending
With
edge blending
Without
edge blending
Overlapping image edges
PT-D12000E
Small Size, Great Convenience
Despite its 12,000-lumen power, the projector is compact, weighs only
35 kg (77.1 lbs) and runs on ordinary household power. This makes it
easy to add to existing facilities and suitable for use at concerts,
performances, and other events.
Ecological-conscious design
Panasonic works from every angle to minimize environmental impact in the product
design, production and delivery processes, and in the performance of the product during
its life cycle. The PT-D12000E reflects the following ecological considerations.
•Lead-free solder is used to mount components to the printed circuit boards.
•Lamp power switching further reduces power consumption.
•Auto Power Save activates standby mode when no signal is input.
Optional accessories
Zoom lens
ET-D75LE6
(1.0-1.2:1)
ET-D75LE1
(1.5-2.0:1)
ET-D75LE2
(2.0-3.0:1)
ET-D75LE3
(3.0-5.0:1)
ET-D75LE4
(5.0-8.0:1)
ET-D75LE8
(7.9-15.0:1)
Fixed focus lens
ET-D75LE5
(0.8:1)
Lens
ET-D75LE1
Lamp
Replacement lamp unit
ET-LAD12K
ET-LAD12KF
(four pack)
Geometric Adjustment
This function enables adjustment of images for projection onto
spherical, cylindrical and other specially shaped screens. You can
make the adjustment easily using just the remote control, with no
external equipment needed. Used together with the multi-screen
support system, the Geometric Adjustment expands your application
possibilities, letting you create a wide range of image effects at
concerts, performances and other special events.
Image showing various Geometric Adjustments
ET-PFD100
ET-HAD100
Frame
Carrying handle
Ceiling mount bracket
Smoke Cut Filter
Input signal board
SD-SDI input signal board
ET-MD77SD1
HD/SD-SDI input signal board
ET-MD77SD3
DVI-D input signal board
ET-MD77DV
Dual link HD/HD-SDI input
signal board
ET-MD100SD4
High-ceiling
mount bracket
ET-PKD100H
Low-ceiling
mount bracket
ET-PKD100S
ET-SFD100
ET-PKD100H
ET-PKD100S
1
3
4
Auto Cleaning Robot
Panasonic’s Auto Cleaning Robot automatically cleans the air filter to
help keep the projector running smoothly. When the projector is
switched on,*
1
the robot uses a brush to clear away any dust adhering
to the filter, helping to prevent clogs that can impair operation or
cause malfunctions. The projector can be used for around 2,000 hours
before the filter needs to be cleaned, making it a good choice for
installation in tight spaces or for ceiling-mounted applications. Also,
the Micro-Cut Air Filter traps particles as small as 10 microns.*
2
This
greatly reduces the amount of dust entering the projector, helping
maintain high brightness and stable operation.
A Host of Functions to Assure Stable, Long-Time Operation
High Reliability & Stability
*
1
Cleaning time can be set by a timer from 00:00 to 23:50 in 10-minute intervals, or
controlled manually. The cleaning process is done only once per 24 hours. When the set
time is reached, the cleaning process will begin if the projector is on or in cooling mode.
*
2
Such as lint particles and pollen.
Liquid Cooling System
This advanced system uses a pump to circulate a cooling liquid behind
the DLP
™
chips to absorb heat. This Panasonic’s technology is made
possible by the reflective nature of the DLP
™
system which enables an
airtight chip structure that minimizes image-quality loss due to dust
adherence. In addition, it allows operation within a wide ambient
temperature range of 0°C (32°F) to 45°C (113°F)*
3
and reduces
operating noise to 43 dB.*
4
*3 The operating temperature range is 0°C (32°F) to 40°C (104°F) when used in High-Altitude
mode (1,400 m [4,593 feet] to 2,700 m [8,858 feet]). Also, if the ambient temperature
exceeds 40°C (104°F) (35°C [95°F] in High-Altitude mode) when using all four lamps, the
light output may be reduced approximately 30% to protect the projector.
*4 Average value at time products are shipped from the factory, in accordance with JIS X
6911:2003 data projector specifications. Measurement methods and conditions are based
on Article 2 of JIS X 6911:2003 data projector specifications.
�
PJLink™ Compatibility
The LAN terminals support PJLink™ class 1 connection.
Control with the same specifications is also possible when
used in a multi-projector system with projectors of another brand.
�
Multi Projector Monitoring & Control Software
Panasonic’s original “Multi Projector
Monitoring & Control”* freeware
allows the user to control and monitor
multiple projectors at the same time
via LAN. When a problem occurs, an
alarm message is sent to the
monitoring/controlling PC.
* Available in June 2008. Please consult a sales
representative if necessary.
�
Web Browser Control
The PT-D12000E can be easily operated remotely over a LAN network,
because it is all done using the computer’s familiar web browser.
Furthermore, the projector sends an e-mail message to notify the
operator when an error has
occurred, or a lamp needs to
be replaced.
Network Function
Lamp LED Indicator and Self-Diagnosis Function
The projector body is equipped with a temperature alarm LED and a
burnt-lamp alarm LED (for lamps 1 to 4). In the PT-D12000E, the
LEDs are visible from both front and top, so you can see it easily even
if the unit is hung from the ceiling. Information
on the error is also given in the on-screen
display. A self-diagnosis function is also
provided. Error codes displayed on the 3-digit,
7-segment LED on the side of the projector tell
the operator what the problem is.
Made in Japan
PT-D12000E projector is carefully manufactured at the Panasonic
factory in Japan under strict quality control. This is another very
important advantage of Panasonic projectors.
�
Smoke Cut Filter
The optional ET-SFD100 Smoke Cut Filter
can be mounted in place of the Auto
Cleaning Robot’s tray. This optional
smoke filter must be used when using
the projector at events where smoke or
fog is dispersed.
Air filter
ACR brush
PC
PC
PC
PC
PC
Remote control
Internet
LAN
LAN
PT-D12000E
DLP
™
chip
(Green)
Reservoir tank
Reservoir tank
Radiator
DLP
™
chip
(Blue)
The PT-D12000E boasts Panasonic’s innovative 4-lamp
optical system, with its 12,000-lumen brightness and
outstanding reliability. It also incorporates Panasonic’s
Detail Clarity Processor to give images extremely realistic
textures, as well as the DLP
™
system, which is resistant to
image degradation over time. With the PT-D12000E,
Panasonic has brought together a host of technologies to
create a projector that delivers big in features, image
performance and reliability.
High brightness:
12,000 lumens
High image quality:
SXGA+
1,400 x 1,050 pixels
A 3-chip DLP
™
Projector with High Reliability and
Excellent System Expandability
