31
Basic Operation
Camera Recording / Remote Control
Remote Control (Optional, page 57)
To operate Camera functions:
Set POWER to CAMERA.
To operate VCR functions:
Set POWER to VCR.
Controlled Functions
Rec/Pause (page 28)
Tele (Zoom) (page 40)
Wide (Zoom) (page 40)
Date/Time (page 25)
Reset (page 49)
PhotoShot (page 41)
Display On TV(page 38)
Counter/Time Code (pages 24)
Audio Dubbing (page 48)
Record (page 51)
Menu (page 18)
Play (page 33)
FF/Search (page 34)
REW/Search (page 34)
Pause/Select (pages 18, 34)
Stop/Set (pages 18, 33)
Slow/Frame Advance (Forward) (pages 34, 36)
Slow/Frame Advance (Backward) (pages 34, 36)
Index Search (Forward) (page 37)
Index Search (Backward) (page 37)
Speaker Volume (page 33)
○
○
○
○
○
○
○
Remote Sensor
MENU
Button
JOG KEY
POWER Switch
Blank Search
You can go directly to a blank portion of
tape and start recording exactly where you
left off.
You can operate the major functions of your Palmcorder from up to approximately 16 feet
(5 m) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder and
press the desired buttons (Remote Sensor is located under the lens).
2 0 0 0
2
J A N
R 0 : 1 2
B L A N K
L P 0 h 1 0 m 1 5 s 2 5 f
1
Set the POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
VCR position.
2
Press MENU
to display the VCR
mode menu screen.
3
Rotate JOG KEY
to select
PLAY
MODE
, then
press JOG KEY
to
display the VCR PLAY MODE menu
screen.
4
Rotate JOG KEY
to select
B.SEARCH
in the VCR PLAY MODE menu (page
23).
5
Press JOG KEY
to select ON.
• “BLANK” will appear on the screen.
100-K.28-33.p65
00/06/14, 11:55
31