manualshive.com logo in svg

Panasonic Digital Palmcorder PalmSight PV-DV100-K, Руководство по эксплуатации, Страница: 10 / 68

Поделиться
Скачать
Panasonic Digital Palmcorder PalmSight PV-DV100-K Скачать руководство пользователя страница 10

10

Supplying Power

To remove the Battery:

Slide the Battery upward while sliding the
BATTERY RELEASE Switch.

Caution:

• Charge only with specified charger.
• The Battery can be charged within a

temperature range of 32° F (0° C) and
104° F (40° C).

• The Battery may be warm after charging

or just after use. This is normal.

• Do not use an insufficiently charged or

worn out Battery.

• In extremely cold surroundings, Battery

charging time will increase.

Safety precautions:

• Do not get the Battery near, or dispose of

in, fire.

• Do not directly connect (short circuit) the

positive (+) and negative (–) terminals.

• Never attempt to disassemble or

reassemble the Battery.

To avoid damage to the Battery:

• Do not drop or jar the Battery.
• Use the Battery with specified models

only.

• If the Battery is used in extremely high

temperatures, a safety device will
automatically prevent operation.

To insure longer battery life:

•

While not in use, remove Battery from
the Palmcorder and AC Adaptor and
store in a cool, dark, dry place.

 If you

leave the Battery in the Palmcorder or on
the AC Adaptor, the Battery will no longer
be rechargeable.

• Keep the Battery terminals clean.

BATTERY RELEASE Switch

Insert/Remove the Battery Pack

Battery Care

1

Tilt Viewfinder upward.

2

Insert the Battery 

and slide it down

until it locks with a click.

1

2

3

1

2

100-K.10-17.p65

00/06/14, 11:54

10

Содержание Digital Palmcorder PalmSight PV-DV100-K





































































Отзывы:

Нет отзывов