Panasonic Diga DMR-XS380, Руководство по эксплуатации

Страница: 81 / 124

Co
nve
n
ien
t func
tions
VQT2J57
81
∫ Digital Audio Output
¾ PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
≥
It will be converted to 48 kHz regardless of the
setting in the following cases.
–The signals have a sampling frequency of over
96 kHz.
–The disc has copy protection.
≥
If “Off” is selected, signals are output as 96 kHz
≥
If “On” is selected, signals are converted to
48 kHz.
(Choose when the connected equipment cannot
process signals with a sampling frequency of
96 kHz.)
¾ Dolby Digital / Dolby Digital Plus
¾ DTS
¾ MPEG
Select the audio signal to output.
∫
Audio Delay
Mis-sync between the video and audio is corrected by
delaying the audio output.
∫ Audio Type for XP Recording
Choose the audio type when recording or copying
with XP mode.
≥
The picture quality of LPCM recordings may be
lower than that of normal XP mode recordings.
≥ The audio becomes Dolby Digital even if you
selected LPCM when using a recording mode other
than XP.
∫ Audio Type for DV Input
You can select the kind of audio when recording from
the unit’s DV input terminal (
> 62).
≥
If “Mix” is selected, both Stereo 1 and Stereo 2 are
recorded.
≥ When recording bilingual broadcast, select the type
of audio in advance from “Bilingual Audio Selection”
(
> 80).
∫
Audio for HG / HX / HE / HL / HM
Recording
If the programme has multi channel audio, priority is
given to what you select.
≥ This setting will give effect in the following cases.
–Convert to HG, HX, HE, HL or HM mode in “DR
File Conversion” (
>
41)
≥
Select “PCM” when the connected equipment
cannot decode the respective audio format.
≥
Not making the proper settings may result in noise.
≥ Sound of HE-AAC audio type is output as PCM
signal regardless of settings.
DMR-XS380EB-VQT2J57_eng.book 81 ページ ２０１０年４月２６日 月曜日 午後７時８分