46
Remote Control
[DVD 1] [DVD 2] [DVD 3]
Others
Setting
ENTER
ENTER
Option
Setup
Remote Control
Clock
Owner ID
DVD 1
System Update
Initialize
TAB
SELECT
RETURN
DVD 1
Remote Control
DVD 2
DVD 3
Disc
Picture
Sound
Display
Connection
Tuning
Others
ENTER
RETURN
SELECT
Setting the remote control
If you use another Panasonic unit at the same location, change the mode of the remote
control so that you can operate the units independently of each other.
Change the code of the remote control so that you can simultaneously
operate another Panasonic DVD unit.
Apply the selected setting [DVD 1, 2 or 3] to the remote control.
!
Press and hold
ENTER
and press the appropriate number button 1, 2 or 3 for at least
2 seconds.
!
Exit the menu with
RETURN
.
Set up the remote control for the unit.
!
Select [DVD 1, 2 or 3] with
and confirm with
ENTER
.
If the remote control setting does not match that of the unit, DVD 1, 2 or 3 appears on
the unit’s display.
!
Press
ENTER
and press the appropriate number key 1, 2 or 3 simultaneously for
at least 2 seconds.
If you want to operate two units independently of each other using the same
remote control, then change the remote control setting.
Setup
FUNCTIONS
/ To Others
Under adverse reception conditions, etc., the Automatic time correction function
may not work. In this case the indication for Clock setting is automatically reset to
[Off]. If the reception conditions improve later on, it is possible to activate this
function.
If the Clock setting is set to [On], do not set it to [Off], otherwise the automatic time
correction function is deactivated.
This DVD Recorder uses a 24-hour-clock.
In the event of a power failure an automatic back-up system maintains the clock for
approximate 60 minutes.
When the Clock setting is set to [On], the automatic time correction function checks
and if necessary adjusts the time several times every day. The automatic time
correction function only works when the DVD Recorder is in standby, it does not
work in the Timer Recording mode.
Clock setting
The clock will normally be set correctly during Auto-Setup however, under certain
circumstances the DVD Recorder cannot set the clock automatically. In this case
follow the operation steps below to manually set the clock.
!
Switch with
automatic mode to [Off] and confirm with
ENTER
.
!
Change with
and Time and Date.
!
Confirm the change with ENTER.
Don't forget to change summer time and winter time.
Activating the automatic time correction function
The correct time for the clock can be automatically maintained when the DVD
Recorder is tuned to a station that transmits a time signal.
!
Switch with
automatic mode to [On] and confirm with
ENTER
.
The automatic setting of the clock begins.
On
Clock
Automatic
Please set the clock.
ENTER : access RETURN : leave
ENTER
CHANGE
RETURN
Time
Date
10
52
04
20
3
2006
:
:
/
/
Clock
