50
RQT9308
Changing the unit’s settings
Signal Condition
You can check the quality and strength of digital broadcast signals.
Realign the aerial if you are receiving a poor signal.
When “Signal Condition” is displayed in grey and cannot be
selected:
1
Press [EXIT] to exit the screen.
2
Press [
W X
CH] to select a digital channel. “D” appears on the
unit’s display.
3
Display the Setup menu again (
>
49).
Press [
3
,
4
] to select “Signal
Condition” and press [OK].
The quality and strength of the
signal are shown.
Press [
W X
CH] to select the
channel.
Signal Quality
Below 2 (display red):
The signal quality is so poor that there may be interference in the
pictures and sound.
2–5 (display orange):
The signal quality is basically adequate, but brief interference in the
pictures and sound is possible in isolated case.
Over 5 (display green):
Optimum picture and sound quality.
Signal Strength
The display for signal strength is grey. “0” means signal strength 0%,
“10” means signal strength 100%.
If the signal is too strong, the display will change from grey to red.
Reduce the signal amplification at your aerial.
≥
When the signal is weak:
– adjust the position and direction of the aerial.
– adjust the aerial reception with “DVB Manual Tuning” in the
Setup menu (
>
49).
– check that the current digital broadcast channel is correctly
broadcasting.
DVB Preferred Language
Press [
3
,
4
] to select “DVB Preferred Language” and press [OK].
§
The language specified as “Original” by the broadcast channel.
∫
Settings for Analogue Channels
Press [OK] to show the following setting.
Manual Tuning
You can delete analogue channels and set the analogue channel
details.
Press [OK] to show Manual Tuning screen.
To delete a programme position
Press [
3
,
4
,
2
,
1
] to select a programme position and press the
“Red” button.
To change the tuning settings for individual programme
position
1
Press [
3
,
4
,
2
,
1
] to select a programme position and press
[OK].
2
Press [
3
,
4
] to select an item and press [
1
].
You can make the following two settings by selecting the external
input channel (AV1, AV2, AV3) in step
1
.
≥
Video System (Auto/PAL/SECAM)
In order to record properly, make the appropriate settings to match
the connected equipment.
≥
Title Page (Auto/Off)
You can select up to 2 different subtitles and audio tracks to be
used when audio and subtitles digital broadcasts are received.
Select the order of priority.
If the selected language is not available, then the language
included in the broadcast programme is selected.
Multi-Audio
Multi-Audio ( alternative )
[English]
[German]
[Italian]
[French]
[Spanish]
[Catalan]
[Basque]
[Galician]
[Corsican]
[Original]
§
Subtitle
Subtitle ( alternative )
[English]
[German]
[Italian]
[French]
[Spanish]
[Catalan]
[Basque]
[Galician]
[Corsican]
[Original]
§
S
ignal Quality
0
10
S
ignal
S
trength
0
10
DVB Channel
DVB
S
ignal Condition
RETURN
Channel
+
Channel
–
[CH14] 5 BR3
Manual Tuning
Pos Channel CH
Pos Channel CH
Delete
1 ARD 4
2 ZDF 2
3 N3 5
4 HR3 8
5 BR3 10
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
OK
RETURN
S
ELECT
Pos
Programme position in the table
(You cannot change the programme position.)
Channel
To enter or change the Channel of a TV
station
Press [
3
,
4
,
2
,
1
] to enter station name
and press [OK].
If the station name needs a blank space,
select the blank between “Z” and “
¢
”.
CH
To enter newly available TV stations or
change the CH number of an already tuned
TV station
Press [
3
,
4
] or the numbered buttons to
enter the CH number of the desired TV
station.
Wait a few moments until the desired TV
station has been tuned.
After the desired TV station is tuned, press
[OK].
Fine Tuning
To obtain the best tuning condition
Press [
3
,
4
] to adjust the best tuning
condition and press [OK].
≥
Press [
1
] to return to “Auto”.
Video System
To select the video system type
Press [
3
,
4
] to select “PAL” or “SECAM” if
the picture lacks colour, and press [OK].
≥
Auto
This unit automatically distinguishes PAL
and SECAM signals.
≥
PAL
For receiving PAL signals.
≥
SECAM
For receiving SECAM signals.
Audio Mode
To select the audio reception type
If sound quality is poor, press [
3
,
4
] to select
“BG” or “L” and press [OK].
≥
BG
PAL B,G,H/SECAM B,G
≥
L
SECAM L, L’
Mono
To select the type of sound to be recorded
Press [
3
,
4
] to select “On” if the stereo
sound is distorted due to inferior reception
conditions, or if you want to record the normal
(mono) sound during a stereo, bilingual or
NICAM broadcast, and press [OK].
Title Page
To enter the Teletext title page for a
channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [
3
,
4
] or numbered buttons to enter
the number and press [OK].
Pos
Channel
CH
Fine Tuning
Video
S
ystem
901
4
Auto
Manual
Tuning
ARD
Auto
Audio Mode
BG
Mono
Off
Title Page
301
RETURN
S
ELECT
DMREX769EC&EF-RQT9308-L_eng.book 50 ページ ２００９年２月２３日 月曜日 午前９時２９分
