77
RQT9385
Referen
c
e
The recorded title is stretched vertically.
¾
16:9 aspect programmes are recorded in 4:3 aspect in the
following cases.
–
[-R]
[-R]DL]
[-RW‹V›]
If you recorded or copied using “EP” or “FR
(recordings 5 hours or longer)” recording mode.
– If you recorded or copied to a +R, +R DL or +RW.
– If you recorded with the “Aspect for Recording” set to “4:3” in
the Setup menu.
When you want to record 16:9 programme in the same
aspect, set “Rec for High Speed Copy” to “On”, and set the
“Aspect for Recording” to “16:9”. (
>
64)
– By setting “Aspect for Recording” to “Automatic”, there is a
chance that the recording will be made using the wrong
aspect. Match the aspect settings to the broadcast when
recording. (
>
64)
It may be possible to adjust the display mode on the TV. Refer
to your television’s operating instructions.
There is a lot of after-image when playing video.
¾
Set “Playback NR” in the Picture menu to “Off”. (
>
59)
When playing DVD-Video using progressive
output, one part of the picture momentarily
appears to be doubled up.
¾
Set “Progressive” in the Picture menu to “Off”. This problem is
caused by the editing method or material used on DVD-Video,
but should be corrected if you use interlace output. (
>
59)
There is no apparent change in picture quality
when adjusted with the Picture menu in the on-
screen menus.
¾
The effect is less perceivable with some types of video.
The images from this unit do not appear on the
television.
Picture is distorted.
¾
Make sure that the television is connected to the AV1 terminal,
VIDEO OUT terminal, S VIDEO OUT terminal, COMPONENT
VIDEO OUT terminals or HDMI terminal on this unit. (
>
8, 9,
69, 70, 71)
¾
Make sure that the television’s input setting (e.g., AV 1) is
correct.
¾
Progressive output is set to on but the connected television is
not progressive compatible. Press and hold [
∫
] and [
1
] (PLAY)
on the main unit at the same time for more than 5 seconds to
cancel this setting. The setting will change to interlace.
¾
The unit’s “TV System” setting differs from the TV system used
by the disc now playing. While stopped, keep pressing [
∫
] and
[
<
OPEN/CLOSE] on the main unit for 5 or more seconds. The
system switches from PAL to NTSC or vice versa. (
>
66)
¾
When this unit is connected with an HDMI cable, use a disc that
matches with this unit’s TV system.
¾
Picture may not be seen when more than 4 devices are
connected with HDMI cables.
Reduce the number of connected devices.
The picture is distorted during play, or video will
not play correctly.
¾
You may be playing a TV programme recorded with poor
reception or unfavorable weather conditions.
¾
The picture may be distorted or a black screen may appear
briefly between recorded titles in the following situations:
– between titles recorded with different recording modes.
– between scenes recorded with different aspect ratios.
– between scenes recorded with different resolutions.
– between playlist chapters.
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
¾
Check the connections and the “Digital Audio Output” settings.
Check the input mode on the amplifier if you have connected
one. (
>
8, 9, 65, 69, 70, 71)
¾
Press [AUDIO] to select the audio. (
>
32)
¾
Audio may not be output due to how files were created. (DivX)
¾
Audio may not be heard when more than 4 devices are
connected with HDMI cables.
Reduce the number of connected devices.
¾
The sound effects will not work when the bitstream signal is
output from the HDMI AV OUT terminal or the OPTICAL
DIGITAL AUDIO OUT terminal.
¾
To output audio from a device connected with an HDMI cable,
set “Digital Audio Output” to “HDMI and Optical” in the Setup
menu. (
>
66)
¾
Depending on the connected equipment, the sound may be
distorted if this unit is connected with an HDMI cable.
¾
If recording to the HDD or a DVD-RAM when “Rec for High
Speed Copy” is set to “On”, you can only record either the main
or secondary audio of a bilingual broadcast.
If you do not intend to copy the title to a DVD-R, DVD-R DL,
DVD-RW (DVD-Video format), +R, +R DL or +RW set “Rec for
High Speed Copy” in the Setup menu to “Off”. (
>
64)
Cannot switch audio.
¾
You cannot switch the audio in the following cases.
– When a DVD-R, DVD-R DL, DVD-RW (DVD-Video format),
+R, +R DL or +RW disc is in the disc tray while DVD drive is
selected.
– When the recording mode is XP and “Audio Mode for XP
Recording” is set to “LPCM”. (
>
65)
– When “Rec for High Speed Copy” is set to “On”. (The default
setting is “On”). (
>
64)
¾
The amplifier is connected using an optical digital cable or an
HDMI cable. You cannot switch the audio if “Dolby Digital” is set
to “Bitstream”. Set “Dolby Digital” to “PCM” or connect using
audio cables. (
>
65, 70)
¾
There are discs for which audio cannot be changed because of
how the disc was created.
Sound
EH6959EC-RQT9385-L_eng.book 77 ページ ２００９年４月２７日 月曜日 午後３時５０分
