Panasonic Diga DMR-E50 страница 76 Скачать руководство пользователя

Страница: 76 / 78

Troubleshooting guide (continued)

Recording and timer recording

Cannot record.

≥

You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the unit
can record onto. (page 10)

≥

The disc is unformatted.
Format the disc so this unit can record on it. (page 39)

≥

The write protect tab on the cartridge is set to “PROTECT”.
Use a ballpoint pen or similar to release the write protection. (page 73)

≥

Recording is not possible unless you set “Disc Protection” in “DISC INFORMATION” to “Off”.
(page 38)

≥

The disc is full or nearly full.
Delete unneeded programmes or use another disc. (page 42)

≥

The material you are trying to record is copy-guarded.

VIDEO Plus+ programming does
not work properly.

≥

The clock is wrong.
Go to Settings in the SETUP menus and correct the clock with “Clock”. (page 64)

≥

If “– –” appears under “Name” after entering a VIDEO Plus+ number. (page 33)

Timer recording does not work
properly.

≥

The timer programme is incorrect.
Make corrections to the programme and check them when you are finished. (pages 33 and 34)

≥

Make confirmation whether “Disc space” is “OK”. When “Disc space” is “!”, your timer programme

doesn’t work correctly. (page 35)

≥

The unit is not on standby for timer recording. (“

” on the unit’s display is not on.)

≥

Different timer programme times overlap. (page 32)

≥

The clock is wrong.
Go to Settings in the SETUP menus and correct the clock with “Clock”. (page 64)

The unit switches to standby
while making a timer recording.

≥

The unit switches to standby while making a timer recording if the disc runs out of space.
Use a disc that has enough space to record the programme.

The timer programme remains
even after recording finishes.

≥

The programme remains if you select weekly or daily setting. (pages 33 and 34)

The available recording time
doesn’t increase even after
erasing all recordings on the disc.

≥

The available recording time on DVD-R does not increase when you erase programmes.

≥

The available recording time does not increase if you erase data written to the disc with the
DVD-RAM drive of a computer.
Format the disc if necessary. (page 39)

Discs make sounds as they rotate. This does not indicate a malfunction.

B.book 76 ページ２００３年２月４日火曜日午後２時５０分

Содержание Diga DMR-E50















































































Результаты поиска

Содержание Diga DMR-E50

Отзывы:

Похожие инструкции для Diga DMR-E50

Бренды по названию

Популярные бренды

Panasonic Diga DMR-E50, Руководство по эксплуатации

Результаты поиска

Содержание Diga DMR-E50

Отзывы:

Похожие инструкции для Diga DMR-E50

Бренды по названию

Популярные бренды