manualshive.com logo in svg

Panasonic DC-FZ1000M2P, Руководство по обслуживанию, Страница: 25 / 69

Поделиться
Скачать
Panasonic DC-FZ1000M2P Скачать руководство пользователя страница 25

25

7 Troubleshooting Guide

7.1.

Wi-Fi Module (Flash P.C.B. (With WIFI ANT))

7.1.1.

How to Remove Wi-Fi Password Protection

To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, this unit pro-
tects the Wi-Fi function with a password.
It is unable to service with password locked condition. When accepting for repair, the unit has been set the Wi-Fi password by cus-
tomer, run the [ Reset Network Settings ] for removing Wi-Fi password, then check the operation.

[Reset Procedure of Wi-Fi Settings]

1) Press the [ MENU/SET ] button, and select the [ SETUP ] mode by Cursor buttons, then press the [ MENU/SET ] button.
2) Select [ Reset Network Settings ] by Cursor buttons, then press the [ MENU/SET ] button.
3) Select [ YES ] and press the [ MENU/SET ] button.

(The [ Reset Network Settings ] performs not only resetting Wi-Fi Password but also resetting other all Wi-Fi Settings.)

7.1.2.

Checking of Trouble Caused by Wi-Fi Module or Not

*Change the Flash P.C.B.(With WIFI ANT), when the above checking detected the abnormal of Wi-Fi module.

Содержание DC-FZ1000M2P






































































Отзывы:

Нет отзывов