Panasonic DC-FZ1000M2P Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 69

Panasonic DC-FZ1000M2P Скачать руководство пользователя страница 12

12

3.5.2.

Initial Settings:

After replacing the Main P.C.B. and/or Flash-ROM, make sure to perform the initial settings after achieving the adjustment by order-
ing the following procedure in accordance with model suffix of the unit.

1. Important Notice:

Before proceeding Initial settings, make sure to read the following CAUTION.

2. Procedures:

• Precautions: Read the above “CAUTION” carefully.
• Preparation:

Attach the fully charged Battery, and insert the memory card (32MB or more).
Remove the lens cap.

•

Step 1. The Temporary Cancellation of “Initial Settings”:

Set the [ Mode dial ] to “[ P ](Program AE mode)” and [ Drive mode dial ] to “Single”.
While pressing [ DISP. ] button and [ AF/AE LOCK ] button simultaneously, turn the power on.

•

Step 2. The Cancellation of “Initial Settings”:

Press the [ Playback ] button in order to enter the [ Playback ] mode.
Press [ AF/AE LOCK ] button and “[ UP ] of Cursor buttons” simultaneously, then turn the power off.

The LCD displays the “ ! ” mark before the unit powers down.

•

Step 3. Turn the Power on:

Set the mode dial to “[ P ] (Program AE mode)”, then turn the power on.

«
...
10
11
12
13
14
...
»

Содержание DC-FZ1000M2P






































































Отзывы:

Нет отзывов