6
Install paper
Setup Procedure
ATTENTION
C
When making 2-sided copies, use the sheet bypass.
C
If the paper tray is not closed completely, the Add Paper Indicator in the control
panel will light up. In that case, please close the paper tray completely.
C
For changing paper size, see page 19.
Lift slightly and pull paper tray out
of copier until it stops.
1
2
Push the bottom plate down until it
locks.
3
Install the paper guide into the
holes that correspond to the paper
size you plan to load.
4
Place paper.
Up to 250 sheets.
Do not fill above
5
#
Slide the paper guide (front) to
the paper edge.
$
Push the paper tray back into
copier.
Overfill Indicator
1-sided copy
Set-up is completed. Now ready to make a copy.
■
■
■
■
■
Push the paper tray into copier. Plug in the unit and turn on the power. When
the Add Paper Indicator (
J
J
J
J
J
) lights, install paper using the following procedure.
