6
CY-VHD9500U
E
N
G
L
I
S
H
CY-VHD9500U
7
E
N
G
L
I
S
H
Safety Information ............................................................. Page 2
Before Installation .................................................................. 20
Safety Installation Diagram .............................................................................................. 20
Open the Display Unit....................................................................................................... 21
Close the Display Unit ...................................................................................................... 21
Display Unit Lateral Angle Adjustment ............................................................................. 21
Installation Guide................................................................... 22
Overview .......................................................................................................................... 22
Supplied Hardware........................................................................................................... 23
Required Tools................................................................................................................. 23
Identify All Leads...............................................................................................................24
Connect All Leads .............................................................................................................25
Final Installation ...............................................................................................................25
Final Checks ......................................................................................................................25
Installation............................................................................ 26
Introduction ..................................................................................................................... 26
Work Flow .........................................................................................................................27
Installation Procedures .....................................................................................................28
Electrical Connections .............................................................. 36
Wiring Diagram (simple system) ......................................................................................36
Wiring Diagram (recommended system) ......................................................................... 37
Wiring Diagram (advanced system) ................................................................................. 38
Troubleshooting...................................................................... 40
Contents
Note:
≥
For
replacing the bulb of the dome light
, please
refer to page 85 in the Operating Instructions.
Safety Information
(continued)
Take care that the wiring is not pinched
or caught by the base plate attached to
the roof or any other parts.
As you cut the headliner, take care
not to cut your fi ngers. Also take care
not to damage any other areas of the
headliner.
Failure to heed this caution may
result in an accident and/or injury.
Cautions
At the time of installation
Before installing the unit, be absolutely
sure to check that the screws do not
make any contact with the ceiling
panel.
If some space is required between
the base plate and the unit, attach
and adjust the under cover. For
details on installing the under cover,
consult your dealer.
Failure to heed this caution may
result in an accident and/or injury.
Wear gloves for installation work to
protect yourself from injuries.
Failure to heed this caution may
result in an accident and/or injury.
Wear goggles or protective eyewear to
shield your eyes from airborne metal
particles during drilling.
Failure to heed this caution may
result in an accident and/or injury.
NO WARRANTY
Panasonic shall have no liability for reduction in safety or any accident caused by installing this
product. We shall not guarantee any auto parts damaged during installation.
Caution for electrical connections:
To prevent damage to the unit, be sure to follow the connection diagram.
Do not connect the power connector to the unit until the wiring is completed.
When connecting stripped wires, be sure to wrap them securely with electrical tape to
prevent shorts.
Bundle all cables and keep cable terminals free from touching any metal parts.
