❐
How to install the product
The diagram below shows an example in which this
product is installed to the floor. Consult a qualified
servicing engineer or your dealer for information on
installing this product to a different location.
When installing the unit with the L-Shaped
Brackets
3
1 Attach the L-shaped brackets
3
on
both sides of product with the binding-
head screws
2
.
2 Install the product with tapping screws
1
.
1
4 tapping screws
(5 mm
·k
16 mm)
E
N
G
L
I
S
H
30
CX-D3000U
39
39
Caution:
≥
All other installation methods required the
use of dedicated metal fittings. Consult with
a qualified servicing engineer or your dealer
if other methods are required.
≥
When drilling holes in the car, make sure
that you do not damage any pipes or wiring
on the underside of the car.
≥
When installing the product, make sure that
the cord is positioned in a location where it
will not pinched or damaged when the seat
slides forward or backward.
❐
Final installation
Lead Connections
Connect all wires, making sure that each
connection is insulated and secure. Bundle all loose
wires and fasten them with tape so they won’t fall
down later.
Congratulations! After making a few final checks,
you’re ready to enjoy your mobile DVD player.
❐
Final checks
1. Make sure that all wires are properly connected
and insulated.
2. Turn on the ignition to check the unit for proper
operation.
If you have difficulties, consult your nearest authorized
professional installer for assistance.
❐
Preparation
≥
Disconnect the cable from the negative
-
battery
terminal (see caution below).
≥
The product should be installed in a horizontal
position with the front end up at a convenient
angle, but not more than 30
o
.
Caution:
≥
Do not disconnect the battery terminals of a car
with a trip or navigational computer since all
user settings stored in memory will be lost.
Instead take extra care with installing the unit to
prevent shorts.
≥
We strongly recommend that you wear gloves
for installation work to protect yourself from
injuries.
Less than 30
x
If you plan to attach the product to the floor,
avoid dusty locations.
3
L-shaped bracket
2
4 binding-head screws
(M5
k
6 mm)
CX-D3000U
