Panasonic CT-2088Y, Руководство по эксплуатации

Страница: 7 / 57

O
PTIONAL
E
QUIPMENT
C
ONNECTIONS
5
l
EN
GLI
S
H
Optional Equipment Connections
Note: The remote control must be programmed with supplied
codes to operate the optional equipment.
VCR Connection
VCRs, video disc players, video game equipment, and
DSS equipment can also be connected to the video inputs.
See the optional equipment manual for more information.
Note for models with Component video input:
• VIDEO 1 input is a dual-purpose input. It is
primarily intended for connection with 480i devices
such as a DVD player using the Y P
B
P
R
component video jacks and Audio L & R jacks.
However, it can also be connected to conventional
composite video sources such as a VCR, using
only the Y/Video jack and Audio L & R jacks. The
on-screen label will display Component or Video 1
depending on which source is connected.
Note: Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 2 for your
model capabilities.
Procedure
• Connect equipment as shown to rear Audio/Video input
jacks.
Note: Use either the S-Video or Video Connection for
models with S-Video connection.
• Select the Video mode by pressing TV/VIDEO button.
• Operate optional equipment as instructed in equipment
manual.
Front Control Panel
The front control panel can be used to access menus and
switch video mode when the remote control is not
available.
Note: Front A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 2 for your
model capabilities.
A second VCR, Camcorder, a video disc player, video
game equipment or DSS equipment can also be connected
to the vidoeo inputs. See the optional equipment manual.
Procedure
• Connect equipment to front Audio/Video input jacks.
• Select the Video mode by pressing TV/VIDEO button.
• Operate optional equipment as instructed in equipment
manual.
Cable Box Connection
Follow this diagram when connecting your television to a
Cable Box.
Procedure
• Tune the television to channel 3 or 4 depending on the
RF out setting of the cable box.
• Using the cable box, tune to the premium cable channel
you want to view.
Digital TV - Set-Top Box (DTV-STB) or DVD
Player Connection (some models)
Use this diagram to connect the Panasonic DTV-STB
(Digital TV-Set-Top Box) to the back of your TV.
Notes:
• There are three video jacks, Y, P
B
, and P
R
.
Separate component color inputs provide
luminance and color separation. Use the L (left)
and R (right) audio inputs.
• Select DTV-STB to 480i output mode. TV set can
receive 480i signal only.
ANT
G
S-VIDEO
VIDEO
INPUT 1
COMPONENT
VIDEO INPUTS
VIDEO OUT
AUDIO OUT
L
R
ANT OUT
ANT IN
PLAY
STOP
R
E
W
FF
Y/VIDEO P
B
P
R
AUDIO L R
INPUT 2
AUDIO L R
ANT
G
S-VIDEO
VIDEO
INPUT 1
COMPONENT
VIDEO INPUTS
CONNECTIONS ON BACK OF THE TV
ANT OUT ANT IN
Incoming
Cable
Y/VIDEO P
B
P
R
CABLES NOT SUPPLIED
AUDIO L R
INPUT 2
AUDIO L R
PLAY
STOP
R
E
W
FF
CABLE BOX
Note: Rear A/V jacks diagram may vary, depending on
model. Please refer to the FEATURE CHART on page
2 for your model capabilities.
ANT
G
S-VIDEO
VIDEO
INPUT 1
COMPONENT
VIDEO INPUTS
Y/VIDEO P
B
P
R
CABLES NOT SUPPLIED
AUDIO L R
INPUT 2
AUDIO L R
COMPOMENT INPUT TERMINALS ON BACK OF THE TV
R-AUDIO-L - VIDEO S-VIDEO
NTSC OUTPUT
Y P
B
P
R
MAIN
VIDEO
DIGITAL TV OUTPUT
L-AUDIO-R
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
Note: Rear A/V jacks diagram may vary, depending on
model. Please refer to the FEATURE CHART on page
2 for your model capabilities.
0452E prod doc2.fm Page 5 Wednesday, April 30, 2003 1:36 PM