How to use
Auto OFF/ON button
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the button until 1 beep is heard, then
release.
• Press the button again to turn off.
POWERFUL/
QUIET
nanoe-G
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Press this button for
5 seconds to switch
OFF/ON hidden display.
Not used in normal
operations.
POWER
(Yellow Green)
TIMER
SLEEP /
POWERFUL
nanoe-G
PURIFIER
(Orange)
(Blue)
(Orange /
Yellow Green)
Remote control
display
C
SLEEP/
SLEEP/
POWERFUL
POWERFUL
nanoe-G
nanoe-G
PURIFIER
PURIFIER
Remote control
receiver
6
To OFF/ON hidden temperature
display
• Press “ ” button for 5 seconds to switch OFF/ON
the hidden temperature display.
• Hidden display is ON by default when unit is switched
on.
• When the display is turn OFF by remote controller,
It will turn ON automatically for few seconds upon
receiving any command from remote or in case of
mains power reset.
To maximise comfort while
sleeping
• This operation provides you with a comfortable
environment while sleeping by gradually increase
the set temperature 1 °C after every 3 hours operation.
• The unit is turned off after 8 hours.
• Can be cancelled by pressing the respective
button again.
SLEEP /
POWERFUL
To switch between POWERFUL
and QUIET mode
POWERFUL: To reach set temperature quickly
SLEEP /
POWERFUL
• This operation stops automatically after 1 hours.
QUIET: To enjoy quiet operation
• This operation reduces airflow noise.
POWERFUL/
QUIET
To select operation mode
AUTO - For your convenience
COOL - To enjoy cool air
DRY - To dehumidify the environment
Unit run with optimised settings.
You can change the temperature according to
your comfort.
To reduce power consumption during COOL mode,
use curtains to screen off sunlight and outdoor heat.
Unit operates at low fan speed to give a gentle
cooling operation.
FAN - To operate Air-Con in “Fan Only” mode
* Indoor unit temp. display will show set temp. for
AUTO,COOL & DRY mode and room temp. for FAN
mode.
Only indoor unit fan operates as per remote settings.
Outdoor is OFF, so no cooling achieved.
Provides fresh air circulation in the room.
ACXF55-2242̲OL.ai 6 1/28/2020 12:46:33 PM
ACXF55-2242̲OL.ai 6 1/28/2020 12:46:33 PM
