33
To
Learn More... / Cleaning the
Air Conditioner
Cleaning the Air Conditioner
Cleaning has to be carried out at regular
intervals to ensure the unit is at optimal
performance. A dirty unit may cause
malfunction and you may retrieve “H 99” error
code. Consult an authorised dealer.
• Before cleaning, switch off the power supply and
unplug the unit.
• Do not touch the aluminium fin as the sharp parts
may cause injury.
• Do not use benzine, thinner or scouring powder.
• Use soap ( pH 7) or neutral household
detergent only.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
nanoe
TM
-G Generator
Once every 2 weeks
• Clean with dry cotton bud.
• Do not touch during operation.
Air filters
Once every 2 weeks
• Wash/rinse the filters gently with
water to avoid damaging the
surface.
• Dry the filters thoroughly under a shade, away
from fire or direct sunlight.
• Replace any damaged filters.
Remove air filter
Attach air filter
Insert into the unit
Indoor unit
Wipe the unit gently with a soft and
dry cloth.
The coils and fans should be cleaned
periodically by an authorized dealer.
Outdoor unit
Clean the debris that surround the
unit.
Clear any blockage from the drain
pipe.
Front panel
Wash gently and dry.
How to remove front panel
Raise over
horizontal
level
1
Pull upward
2
Horizontal
Close it securely
AUTO
OFF/ON
1
Hold
horizontally
2
Match and push in
3
Close down
4 Press both ends and center of the front panel
AUTO
OFF/ON
Aluminium fin
Front panel
Air filters
nanoe
TM
-G Generator
English
ACXF55-29802_FA0121-2.indb 33
ACXF55-29802_FA0121-2.indb 33
1/13/2021 8:23:38 PM
1/13/2021 8:23:38 PM
