Panasonic CS-XE12SKUA-1 Скачать руководство пользователя страница 5

5

Power supply

Do not use a modified 

cord, joint cord, extension 

cord or unspecified cord 

to prevent overheating 

and fire.

  

To prevent overheating, fire or electric 

shock:

• Do not share the same power outlet with 

other equipment.

• Do not operate with wet hands. 

• Do not over bend the power supply 

cord.

If the supply cord is damaged, it must be 

replaced by the manufacturer, service 

agent or similarly qualified persons in 

order to avoid a hazard.
It is strongly recommended to install 

this unit using an Earth Leakage Circuit 

Breaker (ELCB) or Ground Fault Interrupt 

(GFCI) or Appliance Leakage Current 

Interrupt (ALCI) to prevent electric shock 

or fire.
Stop using the product if any abnormality/

failure occurs or turn off the power switch 

and breaker. 

(Risk of smoke/fire/electric shock)

Examples of abnormality/failure

• The ELCB or GFCI or ALCI trip 

frequently.  

• Burning smell is observed.

• Abnormal noise or vibration of the unit 

is observed.

• Water leaks from the indoor unit. 

• Power cord becomes abnormally hot.

• Fan speed cannot be controlled.

• The unit stops running immediately 

even if it is switched on for operation.

• The fan does not stop even if the 

operation is stopped.

Contact your local dealer immediately for 

maintenance/repair.

This equipment must be earthed to 

prevent electrical shock or fire.

Prevent electric shock by switching off 

the power supply:

- Before cleaning or servicing,

- When extended non-use, or

- During abnormally strong lightning 

activity.

CAUTION

Indoor unit and outdoor unit

Do not wash the indoor unit with water, 

benzene, thinner or scouring powder to 

avoid damage or corrosion at the unit.

Do not use for preservation of precise 

equipment, food, animals, plants, artwork 

or other objects. This may cause quality 

deterioration, etc.
Do not use any combustible equipment 

in front of the airflow outlet to avoid fire 

propagation.
Do not expose plants or pet directly to 

airflow to avoid injury, etc.
Do not touch the sharp 

aluminium fin, sharp parts may 

cause injury.
Do not switch ON the indoor unit when 

waxing the floor. After waxing, aerate the 

room properly before operating the unit.
Do not install the unit in oily and smoky 

areas to prevent damage to the unit.
Do not dismantle the unit for cleaning 

purpose to avoid injury.
Do not step onto an unstable bench 

when cleaning the unit to avoid injury.
Do not place a vase or water container 

on the unit. Water may enter the unit and 

degrade the insulation. This may cause 

an electric shock.
Do not open window or door for long time 

during operation, it may lead to inefficient 

power usage and uncomfortable 

temperature changes.
Prevent water leakage by ensuring 

drainage pipe is:

- Connected properly,

- Kept clear of gutters and containers, or

- Not immersed in water
After a long period of use or use with any 

combustible equipment, aerate the room 

regularly.
After a long period of use, make sure the 

installation rack does not deteriorate to 

prevent the unit from falling down.

Remote control

Do not use rechargeable (Ni-Cd) 

batteries. It may damage the remote 

control.
To prevent malfunction or damage of the 

remote control:

• Remove the batteries if the unit is not 

going to be used for a long period of 

time.

• New batteries of the same type must be 

inserted following the polarity stated.

Safety precautions

English

Содержание CS-XE12SKUA-1

































Отзывы: