Panasonic CS-VZ12SKE, Руководство по эксплуатации

Страница: 9 / 88

English
9
INFO
To check HEAT CHARGE level and
error code
To check HEAT CHARGE level.
• Press during HEAT mode to retrieve HEAT CHARGE level of
heat stored in heat absorbing device.
• HEAT CHARGE level: 0 ~ 4 (max.).
• “_ _” will be displayed unless during heating operation.
To check error code.
• Press to retrieve error code when the unit stops and the
timer indicator blinks.
If the signal transmission is failed, “PRESS AGAIN” is
displayed.
+8/10°C
HEAT
To use maintenance
heating
• Maintain indoor temperature at 8/10°C. Fan switches to high
fan speed automatically.
• This operation overwrite the operation mode and could be
cancelled by pressing AUTO, HEAT, COOL or DRY mode.
• Defrost operation at outdoor unit will
result in sudden cold air from indoor unit.
Eliminate cold air with heat mode.
TEMP
10°C
8°C
Auto Restart Control
• If power is resumed after a power failure, the operation will
restart automatically after a period of time with previous
operation mode and air fl ow direction.
• This control is not applicable when TIMER is set.
See "To learn more..." for details.
How to use
To set the timer (daily timer)
Dual setting of ON and OFF timers are available to turn
ON or OFF the unit at different preset time.
MENU CLOCK
ON
OFF
SET
CANCEL
ON
RESET
MENU CLOCK
RESET
2 1 3
OPEN
1
Select ON or OFF timer Example:
OFF at 8:00
• Each time pressed:
OFF
Cancel
2
Set the time
3
Con fi rm
SET
TIMER
• Example of application at living room:
Morning: ON TIMER at 07:00 (Wake up)
OFF
TIMER at 08:00 (Out for work)
Evening: ON TIMER at 17:00 (Back home)
OFF
TIMER at 22:00 (Sleep)
• To cancel ON or OFF timer, press ON or OFF to
select respective or then press CANCEL .
• If timer is cancelled manually or due to power failure,
you can restore the timer again by pressing
ON
or
OFF
to select respective or then press
SET
.
• The nearest timer setting will be displayed and will
activate in sequence.
• When ON Timer is set, the unit may start earlier (up
to 50 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Quick guide.
Note
AUTO
COMFORT
,
ECONAVI
,
nanoe
,
POWERFUL
,
QUIET
,
SLEEP
• Can be activated in all modes and can be cancelled by
pressing the respective button again.
+8/10°C
HEAT
,
AUTO
COMFORT
,
ECONAVI
,
POWERFUL
,
QUIET
• Cannot be selected at the same time.
PRE
HEATING
• Can be combined with AUTO or HEAT mode only.