4
AUTO
HEAT
COOL
DRY
FAN
SPEED
AIR
SWING
POWER TIMER
• In heat mode, it takes a while for the unit to warm up. The
power indicator blinks during this operation.
• Recommended temperature:
20°C ~ 24°C
HOw TO OPERATE
Notes:
• Use a screwdriver to short the two Reset Terminals on the
back of remote control to restore the remote control's default
setting.
• Remove the batteries if the unit is not to be used for a long
period.
REMOTE CONTROL TRANSMITTER
AUTO MODE - fOR yOUR CONvENIENCE
HEAT MODE - TO ENjOy wARM AIR
• Make sure it is not
obstructed.
• Certain fluorescent lights
may interfere with signal
transmission. Please
consult your nearest
dealer.
Maximum distances : 8m
INDICATOR
INDICATOR
RECEIvER
RECEIvER
Close
Insert AAA or
R03 batteries
Pull out
Inserting the batteries
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at the
standard setting temperature.
• To change the standard setting temperature, press
for
“
” or
for “
”.
Room
temperature
Operation
mode
Standard
setting
temperature
(+2°C)
(–2°C)
23°C & above
Cool
25°C
27°C
23°C
Below 23°C
Dry
22°C
24°C
20°C
Below 20°C
Heat
21°C
23°C
19°C
• Recommended temperature:
26°C ~ 28°C
COOL MODE - TO ENjOy COOL AIR
• During soft dry operation, the indoor fan operates at low
fan speed to give a very gentle cooling operation.
• Recommended temperature:
1°C ~ 2°C
lower than room
temperature.
● For heat, cool and dry modes, the range of
temperature can be selected from 16°C ~ 30°C.
DRy MODE - TO DEHUMIDIfy THE
ENvIRONMENT
Select
Turn on
Adjust
temperature
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
MODE OPERATION
MODE OPERATION
AUTO
HEAT
DRY
COOL
• The retention period of batteries might be affected
to be shorter because of the using times of the
remote control, even less than one year.
LCD display
F566240_EN1.indd 4
2009-1-13 13:59:12
Содержание CS-PW12GKE
Страница 27: ...27 g k k ...
