background image

8

ON

OFF

SET

TIMER

CANCEL

TEMP

AIR SWING

OFF/ON

MODE

FAN SPEED

AIR CONDITIONER

How to use

Not used 

in normal 

operations.

Press to restore 

the remote 

control to default 

setting.

POWERFUL: 

To reach the preset temperature quickly

• This operation continues until it is cancelled by 

pressing again 

 button or turn OFF the unit to 

stop this operation.

QUIET: 

To enjoy quiet operation

• This operation reduces air

fl

 ow noise.

AIR SWING

To adjust air

fl

 ow direction

Upper direction

Lateral direction

• For AUTO, the indoor fan speed is automatically 

adjusted according to the operation mode.

• To have low noise priority operation, select the 

lowest fan speed  .

To adjust fan speed

AUTO

FAN

To switch between powerful/quiet

• Do not adjust the 

fl

 ap by hand.

• Do not insert 

fi

 nger into the air 

fl

 ow outlet to prevent 

injury.

• Maintain indoor temperature at 8/15°C. Fan switches 

to high fan speed automatically.

• This operation overwrite the operation mode and could 

be cancelled by pressing 

MODE

.

• Defrost operation at outdoor unit will result in sudden 

cold air from indoor unit. Eliminate cold air with heat 

mode.

To use maintenance heating

15˚C

8˚C

Indicator

POWER

(Green)

TIMER

(Orange)

DEICE

(Blue)

+8/15°C

 

HEAT

(Green)

Receiver

Содержание CS-LZ25TKE
















Отзывы: